Bosch HCP36E51UC/01 - Removing the Appliance

15
6. Screw the flue duct to the sides of the angle bracket
using two screws.
A Upper flue duct
B Lower flue duct
C Screws
D Angle bracket
7. Fasten the lower part of the flue duct using two screws.
8. Install metal grease filter.
Removing the appliance
1. Remove the metal grease filter.
2. Loosen the flue duct.
3. Disconnect the appliance from the power supply.
4. Loosen the exhaust air lines.
5. Loosen screws for fastening the appliance.
6. Remove the appliance.