Installation
English 11
Installation Procedure
Apply Foam Tape Apply foam tape to underside of cooktop trim in one continuous piece.
Install Backwall Trim
(Optional)
Install 2 screws through holes in trim and in range backwall. See Figure 9:
Backwall Trim Strip and Figure 10: Install Backwall Trim Strip
Note:
This step is only required if the countertop does not connect behind
the range (i.e.; when replacing a free-standing range). If backwall
trim and attachment screws are required, they may be ordered from
the service center by calling 800-944-2904 at no charge for up to one
year after purchase date of your Slide-In Range. When ordering,
refer to Service Backwall Trim Kit part no. 652010. See “Cabinet
Requirements” on page 8 for more information
Figure 9: Backwall Trim Strip
Figure 10: Install Backwall Trim Strip
To Next Page
Loading...
