EasyManua.ls Logo

Bosch HDS7052C User Manual

Bosch HDS7052C
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTALLATION INSTRUCTIONS
FOR USE WITH BOSCH DUAL FUEL RANGES
NOTICE D'INSTALLATION
À UTILISER AVEC LES FOURS BI-COMBUSTIBLES DE BOSCH
INSTRUCCIONES DE INSTALACIÓN
PARA UTILIZAR CON ESTUFAS DE DOBLE COMBUSTIBLE DE BOSCH
Question and Answer IconNeed help?

Do you have a question about the Bosch HDS7052C and is the answer not in the manual?

Bosch HDS7052C Specifications

General IconGeneral
BrandBosch
ModelHDS7052C
CategoryOven
LanguageEnglish

Summary

Important Safety Instructions

Gas Leak Safety Procedures

Steps to take if gas is detected, including who to contact.

Anti-Tip Hazard Prevention

Warning about range tipping and importance of anti-tip bracket.

Anti-Tip Bracket Installation Verification

How to check if the anti-tip bracket is properly installed and engaged.

Preparation

Ventilation Installation Recommendation

Guidance on installing a ventilation hood above the range.

Cabinet Preparation and Clearances

Requirements for adjacent cabinets and clearances around the range.

Electrical Connection

Electrical Connection Preparation

Information on power requirements and preparing for electrical connection.

Strain Relief Installation

How to install the strain relief for the power cord.

Three-Wire Electrical Connection

Detailed steps for connecting the range using a three-wire setup.

Four-Wire Electrical Connection

Detailed steps for the preferred four-wire electrical connection.

Connect Gas Supply

Flexible Connector Installation

Steps for connecting the gas supply using a flexible connector.

Rigid Pipe Connection

Steps for connecting the gas supply using a rigid pipe.

Test the Installation

Gas Leak Testing Procedure

Method for checking gas connections for leaks.

Electric Ignition Testing

Steps to verify the burner ignition system is working correctly.

Burner Flame Adjustment and Testing

How to inspect and adjust burner flames for proper combustion.

Service

Before Calling Service Information

What to do and prepare before contacting service.

Product Data Plate Location

Information on where to find the model and serial number for service.

Related product manuals