en
7
8. Unscrew screws (6) and remove holder (7).
9. Apply holder (7) and apply screws (6) and tighten.
Hold on to the fridge compartment door!
10. Unscrew 2 screws (8).
11. Remove middle hinge (9).
12. Unhook the fridge compartment door and set it
down on a soft surface.
13. Unscrew screws (10) and remove holder (11).
14. Apply holder (11) and apply screws (12) and
tighten.
15. Pull out 2 cover plugs (12) and insert into the
borings (13).
16. To avoid damaging the appliance rear side, provide
cushioning material. Place the appliance carefully
onto its rear side.
17. Unscrew feet (14).
18. Unscrew 3 screws (15) each at the bottom
hinge (16) and the front foot holder (17).
19. Unscrew nut (18) and pull out bolt (19).
20. Insert bolt (19) into the left boring and apply
nut (18) and tighten.
21. Apply hinge (16) and apply 3 screws (15) and
tighten.
22. Apply foot holder (17) and apply 3 screws (15) and
tighten.
23. Screw feet (14) into the hinge (16) and the foot
holder (17) .
24. Turn the appliance upright again.
To Next Page
Loading...
Need help?
General
