English – 27
– A user account has been created.
– No update is currently being carried out on the eBike.
– The eBike is connected to the smartphone via Bluetooth®.
– The eBike is stationary.
– The smartphone is connected to the Internet.
– The eBike rechargeable battery is sufficiently charged, and the charging
cable is not connected.
You can set up <eBike Lock> in the eBike Flow app under the settings
menu item.
You can deactivate the support of your drive unit with immediate effect by
switching on <eBike Lock> in the eBike Flow app. Deactivation can only be
canceled if your smartphone is nearby when switching on the eBike system.
Your smartphone must have Bluetooth® switched on for this, and the eBike
Flow app must be active in the background. The eBike Flow app does not
have to be opened. If <eBike Lock> is activated, you can also use your eBike
without support from the drive unit.
Compatibility
<eBike Lock> is compatible with these Bosch eBike product lines:
Drive unit Product line
BDU374x Performance Line CX
BDU33xx Performance Line
How it works
In conjunction with <eBike Lock>, the smartphone works in a similar way to
a key for the drive unit. <eBike Lock> becomes active when the eBike sys-
tem is switched off. The status of <eBike Lock> is shown on the display of
the on-board computer with a padlock symbol for a short time after switch-
ing on.
Note: <eBike Lock> alone does not provide adequate theft protection; it is
simply a supplement to a mechanical lock. <eBike Lock> does not provide
any form of mechanical lock for the eBike. Only the assistance from the drive
unit is deactivated. As long as the smartphone is connected with the eBike
via Bluetooth®, the drive unit is unlocked.
If you give third parties temporary or permanent access to your eBike or
want to bring your eBike in for a service, deactivate <eBike Lock> in the
eBike Flow app under the settings menu item. If you want to sell your
Bosch eBike Systems 0 275 U07 3en | (01.02.2022)
To Next Page
Loading...
