English – 28
eBike, also delete the eBike from your user account in the eBike Flow app
under the settings menu item.
If the eBike system is switched off, the drive unit will emit a "Lock" sound
(i.e. an audio signal that is played once) to indicate that the assistance from
the drive unit is switched off.
Note: The audio signal will only be played if the system is switched on.
If the eBike system is switched on, the drive unit will emit two "Unlock"
sounds (i.e. an audio signal that is played twice) to indicate that the assis-
tance from the drive unit is enabled again.
The "Lock" sound helps you to recognize whether <eBike Lock> is activated
on your eBike. The audio signal is activated by default, it can be deactivated
in the eBike Flow app under the settings menu item by selecting the lock
symbol below your eBike.
Note: If you are no longer able to set up or switch off <eBike Lock>, please
contact your bicycle dealer.
Replacing eBike components and <eBike Lock>
Replacing the smartphone
1. Install the eBike Flow app on the new smartphone.
2. Log in using the same account with which you activated <eBike Lock>.
3. <eBike Lock> is displayed as set up in the eBike Flow app.
Replacing the drive unit
1. <eBike Lock> is displayed as deactivated in the eBike Flow app.
2. Activate <eBike Lock> by pushing the <eBike Lock> control unitto the
right.
3. If you hand over your eBike to a bicycle dealer for maintenance, it is rec-
ommended to temporarily deactivate <eBike Lock> to avoid a false
alarm.
Bosch eBike Systems 0 275 U07 3en | (01.02.2022)
To Next Page
Loading...
