en
21
Controls
Fig. 2
Switching the
appliance on
Fig. 2
Switch on the appliance with the On/Off
button 1.
The temperature display 2 indicates the
selected temperature.
The appliance starts to cool, the light is
switched on when the door is open.
When the appliance has been switched
on, it may take several hours until the set
temperature has been reached. Do not
put any food in the appliance
beforehand.
Operating tips
■ While the refrigeration unit is running,
water droplets or a thin layer of ice
may form at the rear panel of the
refrigerator. This is nothing unusual.
It is not necessary to scrape off the
frost or wipe off the water droplets.
The rear panel defrosts automatically.
The condensation collects in the
drainage channel and is carried to the
refrigeration unit where it evaporates.
■ If the air humidity is high,
condensation may form in the
refrigerator compartment, especially
on the glass shelves. If this is the
case, pack or wrap the food and
select a lower temperature in the
refrigerator compartment.
Setting the
temperature
Refrigerator compartment
Fig. 2
Keep pressing temperature setting
button 4 until the required refrigerator
compartment temperature is set.
The value last selected is served.
The set temperature is indicated on
display 2.
We recommend a factory setting
of +4 °C in the refrigerator compartment.
Perishable food should not be stored
above +4 °C.
1 On/Off button
Serves to switch the appliance on
and off.
2 Temperature display
The numbers correspond
to the set refrigerator
compartment temperatures in °C.
3 Super cooling indicator
illuminates when “super cooling”
is on.
4 Temperature selection button
Press this button to set the
temperature.
To Next Page
Loading...
