Bosch MUM5 series - Operation

26
en Operation
Note
The swivel arm features an “Easy Armlift”
function which supports the upwards move-
ment of the swivel arm.
Selecting the operating position:
 Press the Release button and move the
swivel arm. Support movement with your
hand.
 Move the swivel arm until it engages in the
required position.
Position Drive MUM
52/P5..
MUM
54/55/
56..
1
7
1-4 1-7
1-3 1-5
1-2 1-3
2
7 * – –
3
6
2-4 3-7
2-3 3-5
4
9 3-4 5-7
7
3-4 5-7
* Insert / remove whisk, stirrer or kneading
hook.
Operation
W Risk of injury!
Do not insert mains plug until all preparations
for working with the appliance are complete.
Attention!
Do not operate the appliance without an
accessory/tool in the operating position. Do
not operate the appliance empty. Do not
expose appliance or accessories to heat
sources. Parts are not microwave-safe.
 Before operating the appliance and acces-
sories for the first time, clean thoroughly;
see “Cleaning and servicing”.
Important information
In these instructions for use the recom-
mended reference values for the operating
speed refer to appliances with a 7-setting
rotary switch. For appliances with a 4-setting
rotary switch you can find the values in
brackets after the values for a 7-setting
rotary switch.
Preparation
 Place the base unit on a smooth, clean
surface.
 Pull out the power cord (Fig. C).
MUM52../MUMP5../MUM54..
Cord store:
Pull out cable to the required
length.
MUM55../MUM56..
Automatic cord winder:
Pull out the cord in one go to
the required length (max.
100 cm) and slowly release; the
cord is locked.
Reducing the cord length:
Pull gently on the cord and allow it to roll
up to the required length. Then gently pull
the cord again and slowly release; the
cable is locked.
Warning!
Do not twist the cord when inserting it. If the
appliance features an automatic cord winder,
do not insert the cord manually. If the cord
jams, pull out the cord all the way and then
allow it to wind up.
 Insert the mains plug.