Bosch Nexxt 500 Plus Series - Troubleshooting; Safety Warning; Common Problems and Solutions

Troubleshooting
TO AVOID RISK OF
ELECTRICAL SHOCK!
Repairs or replacement of parts
may be carried out by authorized
technicians only.
Problem
Dryerdoesnotstart.
"Start/St0p"indicatorHghtdoesnot
illuminate.
Programhas beeninterrupted.
A warningsignalis emittedandthe
displayshows"E:O1".
Degreeof dryinghasnotbeenreached
or the dryingtime istoo long.
Displaymayindicate"g:03".
Drumfightdoesnot function.
Before calling the customer service,
check whether you can rectify the fault
yourself by means of the following
table.
Ifa fault cannot be rectified or a repair
is required:
Possiblecause
Mainplugnotinse_tedat allor not insertedcorrectly.
A fuseofpowersupplyhastripped.
"Start!Stop"buttonnotpressed.
Noprogramselected.
Doornot closed.
Ambienttemperaturebelow41 °F/5°C.
Lintfilterdirty.
Exhaustair ductis blockedortoolong.
Faultin programsequenceor malfunction.
Theroom/cabinetis not adequatelyventilated.
Moisturesensordirty.
Exhaustair ductis blockedortoolong.
Lintfilterdirty.
Laundrywastoowet.
Unsuitableprogramselected.
Maximumdryingtime wasexceeded.
Motorlimittemperaturewasexceeded.
Noprogramselected.
Lightbulbdefective,light bulbburnedout.
Nopowersupply.
Lightbulbisloose.
1. Set program selector to "Off".
2. Turn off the circuit breaker.
3. Pull the main plug out of the
socket.
4. Call customer service
(see page 21).
"StaWStop"indicatorlightdoesnot Faultin programsequenceor malfunction.
ifluminate."Wnnk]eblock" indicator
lights.
Thedisplayshows"000".
Lintfilter LEDis blinkingaftertintfilter Blinkingof lintfilter LEDis notanindicationofa Noactionrequired. Lightwill stopbflnking.
hasbeencleaned problem.It is usedonlyasa reminder,
Remedialaction
Insertmainplugcorrectly.
Replace/switchon fuse.
Press"Start/Stop"button.
Selectprogram,
Closedoor.
Increaseroomtemperature.
Cleanfilter asdescribedonpage18.
Switchoff/switchonagain.
Cleanexhaustairduct.Reduceexhaustair ductto
maximumlengthasdescribedon page8.
Switchoff/switchonagain.
Switchoff dryer,leaveto cooldownfor 30 min,
switchon again.
Restartprogram.
Provideanadequatesupplyof freshair.
Switchoff/switchonagain.
Cleanmoisturesensoras describedon page18.
Switchoff/switchonagain.
Cleanexhaustair extraction,Reduceexhaustair duct
to maximumlengthasdescribedon page8.
Switchoff/switchonagain.
Cleanfilter asdescribedonpage18.
Switchoff/switchonagain,
Spinlaundryat higherspeedin thewashing
machine,Switchoff/switchon again.
Selectprogramwithaid of theprogramselection
table(seepage15).Switchoff/swkchon again.
Cleanlintfilter (seepage18).
Checkexhaustair extraction.
Spinlaundryata higherspeedinyour washer.
Switchoff dryer,leaveto coo]downfor 30 min.
Switchon again,Startprogram.
Selectprogram.
Changelight bulb,seepage19.
Guaranteepowersupply.
Tightenlightbulb. Removeandreinstallthecoveras
directedon page24.
Switchoff dryer,leaveto cooldownfor 30 min,
switchon again.
Restartprogram.
2O