Need help?Do you have a question about the Bosch NIT5060UC and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | NIT5060UC |
| Category | Cooktop |
| Type | Induction |
| Width | 30 inches |
| Surface Type | Glass |
| Number of Burners | 5 |
| Control Type | Touch |
| Power Levels | 17 |
| Voltage | 240 Volts |
| Frequency | 60 Hz |
| Color | Black |
| Safety Features | Child Lock |
Explains safety signal words like WARNING, CAUTION, NOTICE.
Advises reading manual, keeping instructions, and checking for transit damage.
Stresses installation by qualified personnel and retaining instructions for future reference.
Warns about sharp edges and advises caution when reaching behind or under the appliance.
Lists compliance with relevant UL and CSA safety standards for appliances.
Covers installer duties, branch circuit requirements, and proper grounding procedures.
Informs about potential chemicals known to cause cancer or reproductive harm.
Instructs to check all parts for damage and completeness after unpacking.
Lists essential tools and accessories required for installation.
Specifies necessary clearances and dimensions for cabinets surrounding the cooktop.
Outlines countertop levelness, stability, heat resistance, and thickness requirements.
Advises checking approved combinations for ovens/microwaves and hood clearances.
Details cutout angle, cleaning, sealing, and thickness for countertop preparation.
Provides specific cutout measurements for 24" cooktops.
Provides specific cutout measurements for 30" cooktops.
Provides specific cutout measurements for 36" cooktops.
Details necessary air supply and clearances for proper cooktop ventilation.
Explains how to install the heat shield to prevent component overheating.
Describes securing the cooktop to the countertop using provided hold-down brackets.
Lists general requirements for a safe and compliant electrical connection.
Details voltage, system, and circuit breaker requirements for various models.
Provides step-by-step instructions for connecting the cooktop to the electrical supply.
Steps to verify the cooktop functions correctly after installation is complete.
Instructions for safely disconnecting and removing the appliance from its installation.
Explains where to find model and production numbers for service and support.
Shows the location of the appliance's rating plate for identification.
To Next Page
