To Next PageTo Next Page
Need help?Do you have a question about the Bosch Optiflow GWH16 3 CT E23 F6 L S2405 and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | Optiflow GWH16 3 CT E23 F6 L S2405 |
| Category | Water Heater |
| Language | English |
Explains the meaning of symbols used in the document.
Provides essential safety instructions for gas leaks and appliance operation.
States the appliance has been tested and certified to Australian Standards.
Provides a breakdown of model designations and their meanings.
Lists the items included with the gas continuous flow water heater.
Describes the location and information on the appliance's rating plate.
Details the appliance's features such as external mounting and ignition type.
Lists optional accessories available for the appliance.
Specifies the physical dimensions and required clearance zones for installation.
Diagram and labels identifying the main components of the appliance.
Provides a detailed schematic of the appliance's electrical connections.
Lists technical features, performance, gas, water, and electrical specifications.
Details local by-laws and regulations for installation and use of gas appliances.
Guidance on selecting the appropriate location for the appliance.
Specific regulations for the appliance's installation location and clearances.
Specifies the minimum clearances required around the appliance for safety and service.
Steps and notices for physically installing the appliance, including unpacking and checks.
Instructions for connecting the cold and hot water pipes to the appliance.
Recommendations for fitting a temperature control device for safety.
Guidance on complying with standards for gas connection, including isolation valves and testing.
Procedure for adjusting the appliance for correct operation at high altitudes.
Instructions for connecting an optional remote control to the appliance.
Safety warnings and requirements for electrical connection of the appliance.
Details on how to connect the power cable in accordance with standards.
Steps for starting up and operating the appliance after installation.
Procedure to adjust the maximum water temperature for preset appliances.
Method for calibrating the delivered water temperature to match the setpoint.
Information on the factory settings displayed on the appliance's data plate.
Instructions on how to access and navigate the appliance's service menu.
Procedures for adjusting appliance parameters via the service menu.
Location of test points required for gas pressure adjustments.
Procedure to adjust the maximum gas flow (Parameter P1) using pressure gauges.
Procedure to adjust the minimum gas flow (Parameter P2) using pressure gauges.
Procedure to adjust the burner pressure (Parameter P0) as required.
Procedure to restore the appliance to its original factory default settings.
Covers functional checks and specific maintenance tasks for the heat exchanger and burner.
Step-by-step guide for replacing the fuse within the electronic control unit.
Procedures for safely restarting the appliance after maintenance work.
Lists common display error codes, their descriptions, and possible solutions.
Bosch's commitment to environmental protection, product efficiency, and safety.
Information on Bosch's participation in recycling programs and environmentally friendly packaging.
Guidance on dismantling and recycling of used appliance components.
Details acceptable water quality parameters and potential risks from poor quality water.
Bosch's offer to repair or exchange faulty units during the warranty period.
Defines warranty periods for domestic and commercial applications, and coverage.
Lists conditions that will void the warranty, such as faulty installation or misuse.
Conditions for claiming warranty, including proof of purchase and authorized installation.
Steps to follow for lodging a warranty claim and the procedure involved.
How customer personal information collected during warranty claims is used.
Contact information for warranty claims and general inquiries.
