What does 'OVERLOAD SCALE' or 'UNDERLOAD SCALE' mean on my Bosch Food Processor?
If your Bosch Food Processor displays 'OVERLOAD SCALE' or 'UNDERLOAD SCALE', it means the measurement is outside the scale's range (-990 g to 5000 g). Do not add more than 5000 g or remove more than 990 g of ingredients.
What does 'FOR SCALE STOP MACHINE' mean on my Bosch Food Processor?
If your Bosch Food Processor displays 'FOR SCALE STOP MACHINE', it means the scale is switched on while the appliance is running. Switch the appliance off and wait until it stops before using the scale.
What does 'OVERLOAD or UNDERLOAD' mean when using SensorControl Plus on my Bosch Food Processor?
If you see 'OVERLOAD' or 'UNDERLOAD' when using SensorControl Plus on your Bosch Food Processor, it means that too much or too little of the ingredients was added for the selected program. Add ingredients according to the specified quantities.
What to do if my Bosch Mixer shows 'ERROR MOTOR OVERLOAD'?
If the Bosch Mixer displays 'ERROR MOTOR OVERLOAD', turn the rotary switch to 'y' and disconnect the mains plug. Then, reduce the amount of food being processed or the processing time, and allow the appliance to cool down. Also, check the appliance and accessories for any blockages and clear them. If the message continues to appear, the motor or scales may be defective, or the scale is exposed to vibrations. To reset the scales, hold down one of the function buttons (D/A/C) until “OptiMUM” appears on the display. Avoid using the appliance on worktops when a dishwasher is running underneath.
General| Brand | Bosch |
|---|---|
| Model | OptiMUM MUM9 Series |
| Category | Kitchen Appliances |
| Language | English |
To Next Page
