Bosch PBH 2100 SRE - Mounting and Operation; Inserting SDS-plus Drilling Tools; Removing SDS-plus Drilling Tools; Inserting Key Type Drill Chuck

12 | English
1 609 92A 0JP | (3.12.14) Bosch Power Tools
Mounting and Operation
The following table indicates the action objectives for mounting and operation of the power tool. The instructions for each action
objective are shown aside. Depending on the type of application, various instruction combinations are required. Observe the
safety instructions.
Action Figure Please observe Page
Inserting SDS-plus drilling tools
1 82
Removing SDS-plus drilling tools 2 82
Inserting the key type drill chuck
(PBH 2100 SRE, PBH 2500 SRE)
3 83
Inserting the keyless chuck
(PBH 2500 SRE)
*Not available in all countries.
*
4 83
Selecting the operating mode and
rotation direction
5 84–85
Changing the chisel position
(Vario-Lock)
6 85
Changing the position of the
auxiliary handle
7 85
Adjusting the drilling depth X
8 86
Mounting the extraction system
(Saugfix)
9 86
X
OBJ_BUCH-1576-004.book Page 12 Wednesday, December 3, 2014 9:44 AM