Need help?Do you have a question about the Bosch PBS 7A and is the answer not in the manual?
Essential PPE includes safety goggles, ear protection, dust mask, gloves, hair protection, and appropriate clothing.
Follow safety guidelines for cable handling, power connection, and machine operation.
Attach the dust box onto the outlet piece 9 and allow it to snap in; ensure holder 8 latches correctly.
Actuate latching lever 10, pull box down, empty dust, clean filter element with a soft brush.
Ensure the power source voltage matches the nameplate. 230V equipment can connect to 220V.
Push On/Off switch 1 to start. Press lock-on button 2 to keep it engaged. Release switch or push/release to turn off.
Pre-select belt speed using thumbwheel 6 during operation based on material tested.
Use light pressure, work with machine's weight. Apply to workpiece when switched on, use parallel/overlapping strokes with grain.
Change worn, clogged, or torn belts. Do not use belts for metal on other materials.
Turn machine upside down, clamp to workbench using screw clamps 15 in recesses 7. Use parallel/angle guide 14.
Fasten base unit with screws, clamp to workbench with screw clamps 15. Use parallel/angle guide 14.
Pull mains plug before work. Keep machine and ventilation slots clean. Remove sanding dust with a brush.
Remove access clip 13 periodically to ensure optimum extraction performance.
Contact after-sales service centre for repairs. Include 10-digit order number for correspondence.
To Next Page
General
