Bosch PDA 180 User Manual

9
2 609 932 210 • 02.06
■ Before working on machine disconnect from
power supply by removing plug from socket.
Always keep the machine and the ventilation slots
clean.
If the machine should happen to fail despite the care
taken in manufacture and testing, repair should be
carried out by an authorised customer services
agent for Bosch power tools.
For all correspondence and spare parts orders, al-
ways include the 10 digit order number from the
nameplate of the machine!
WARNING! Important instructions for connect-
ing a new 3-pin plug to the 2-wire cable.
The wires in the cable are coloured according to the
following code:
Do not connect the blue or brown wire to the earth
terminal of the plug.
Important: If for any reason the moulded plug is re-
moved from the cable of this machine, it must be dis-
posed of safely.
Recycle raw materials instead of dis-
posing as waste
The machine, accessories and packag-
ing should be sorted for environmental-
friendly recycling.
These instructions are printed on recycled paper
manufactured without chlorine.
The plastic components are labelled for categorized
recycling.
Measured values determined according to
EN 50 144.
Typically the A-weighted sound pressure level of the
tool is 80 dB (A). The noise level when working can
exceed 85 dB (A).
Wear ear protection!
The typically weighted acceleration is 3 m/s
2
.
www.bosch-pt.com
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
GB-Middlesex UB 9 5HJ
✆ Service................................. +44 (0)18 95 / 83 87 82
✆ Advice line.......................... +44 (0)18 95 / 83 87 91
Fax ................................................. +44 (0)18 95 / 83 87 89
Ireland
Beaver Distribution Ltd.
Greenhills Road
IRL-Tallaght-Dublin 24
✆ Service....................................... +353 (0)1 / 414 9400
Fax ....................................................... +353 (0)1 / 459 8030
Australia
Robert Bosch Australia L.t.d.
RBAU/SPT2
1555 Centre Road
P.O. Box 66 Clayton
AUS-3168 Clayton/Victoria
✆ ................................................... +61 (0)1 / 800 804 777
Fax ................................................... +61 (0)1 / 800 819 520
www.bosch.com.au
E-Mail: CustomerSupportSPT@au.bosch.com
New Zealand
Robert Bosch Limited
14-16 Constellation Drive
Mairangi Bay
Auckland
New Zealand
✆ ......................................................... +64 (0)9 / 47 86 158
Fax ......................................................... +64 (0)9 / 47 82 914
We declare under our sole responsibility that this
product is in conformity with the following standards
or standardisation documents: EN 50 144 according
to the provisions of the directives 89/336/EEC,
98/37/EC.
Dr. Gerhard Felten Dr. Eckerhard Strötgen
Senior Vice President Engineering Head of Product Certification
Robert Bosch GmbH, Geschäftsbereich Elektrowerkzeuge
Maintenance and Cleaning
Environmental Protection
Noise/Vibration Information
strain relief
live = brown
neutral = blue
To be fitted
by qualified
professional only
Service and
Customer Assistance
Declaration of Conformity
Subject to change without notice

Bosch PDA 180 Specifications

General

Sanding plate dimension over corner	92 mm
Idle speed (max)	9200 RPM
Oscillating orbit diameter	1.5 mm
Idle oscillation rate (max)	18400 OPM
Input power	180 W
Output power	80 W
Power source	AC
Product color	Black, Green
Adjustable speed	-

Weight and Dimensions

Weight	1100 g