Bosch Perf Gen3 KOGA Kiox BUI330 - Charger Technical Data; Battery Fitting and Testing; Clean Surfaces for Battery Placement; Initial Battery Test

English – 2
In addition to the functions shown here, changes to software
relating to troubleshooting and functional modifications may
be introduced at any time.
(1)
Rack-mounted battery holder
(2)
Rack-mounted battery
(3)
Operation/state of charge indicator
(4)
On/off button
(5)
Key for the battery lock
(6)
Battery lock
(7)
Upper standard battery holder
(8)
Standard battery
(9)
Lower standard battery holder
(10)
Cover (supplied only on eBikes with two battery
packs)
(11)
Charger
(12)
Socket for charging connector
(13)
Charging socket cover
(14)
PowerTube battery safety restraint
(15)
PowerTube battery
(16)
PowerTube battery safety hook
Technical data
Li-ion batteryPowerPack 300PowerPack 400PowerPack 500
Product codeBBS245
A) B)
BBR245
B) C)
BBS265
A)
BBR265
C)
BBS275
A)
BBR275
C)
Rated voltageV=363636
Nominal capacityAh8.21113.4
EnergyWh300400500
Operating temperature°C−5 to +40−5 to +40−5 to +40
Storage temperature°C+10 to +40+10 to +40+10 to +40
Permitted charging temperature range°C0 to +400 to +400 to +40
Weight, approx.kg2.5
A)
/2.6
C)
2.5
A)
/2.6
C)
2.6
A)
/2.7
C)
Protection ratingIP 54 (dust- and
splash-proof)
IP 54 (dust- and
splash-proof)
IP 54 (dust- and
splash-proof)
A)Standard battery
B)Cannot be used in combination with other batteries in systems with two batteries
C)Rack-mounted battery
Li-ion batteryPowerTube 400PowerTube 500PowerTube 625
Product codeBBP282 horizontal
A)
BBP283 vertical
A)
BBP280 horizontal
BBP281 vertical
BBP290 horizontal
BBP291 vertical
Rated voltageV=363636
Nominal capacityAh1113.4
16.7
EnergyWh400500625
Operating temperature°C–5to+40–5to+40–5to+40
Storage temperature°C+10to+40+10to+40+10to+40
Permitted charging temperature range°C0to+400to+400to+40
Weight, approx.kg2.92.93.5
Protection ratingIP54 (dust and splash-
proof)
IP54 (dust and splash-
proof)
IP54 (dust and splash-
proof)
A)Cannot be used in combination with other batteries in systems with two batteries
Fitting
u Ensure the battery is placed on clean surfaces only.
Avoid getting dirt, e.g. sand or soil, in the charging socket
and contacts in particular.
Testing the battery before using it for the first
time
Test the battery before charging it for the first time or using
it in your eBike.
To do this, press the on/off button (4) to switch the battery
on. If none of the LEDs on the battery charge indicator (3)
light up, the battery may be damaged.
0 275 007 XPX | (01.04.2020)Bosch eBike Systems