Bosch PIV975DC1E - Time-Setting Options; Switch-Off Timer; Timer; Count-Up Timer

Time-setting options en
9
Deep-frying, 150–200g per
portion in 1–2l oil, deep-fat
fried in portions
1
Frozen products, e.g. chips,
chicken nuggets
8-9 -
Croquettes, frozen 7-8 -
Meat, e.g. chicken portions 6-7 -
1
Without lid
2
Preheat to power level 8 - 8.5
Fish, breaded or battered 6-7 -
Vegetables, mushrooms,
breaded, beer-battered or tem-
pura
6-7 -
Small baked items, e.g. dough-
nuts, battered fruit
4-5 -
1
Without lid
2
Preheat to power level 8 - 8.5
Time-setting options
8 Time-setting options
Your hob has various functions for setting the cooking
time:
¡ Switch-off timer
¡ Timer
¡ Count-up timer
8.1 Switch-off timer
Allows you to program a cooking time for one or more
cooking zones. Once the time has elapsed, the cook-
ing zone is automatically switched off.
Switching on Switch-off timer
1.
Select the cooking zone and the power level.
2.
Press ⁠.
a The indicator for the hotplate will light up.
3.
Set the time on the control panel.
‒ To set a cooking time of less than 10 minutes,
always touch 0 before you select the required
value.
4.
Press to confirm.
a The cooking time begins to count down.
a Once the cooking time has elapsed, the cooking
zone switches itself off and an audible signal
sounds.
Note:If a cooking time has been programmed in a
cooking zone in which the PerfectFry Sensor is activ-
ated, the programmed cooking time will start to count
down as soon as the selected temperature level has
been reached.
Changing or switching off Switch-off timer
1.
Select the cooking zone and touch ⁠.
2.
In the settings area, change the time or set to to
delete the time.
3.
Press to confirm.
8.2 Timer
Enables the activation of a timer of 0–99 minutes. This
function can be used independently of the cooking
zones and other settings. It does not automatically
switch off the cooking zones.
Switching on Timer
1.
Touch ⁠.
2.
Set the desired time on the control panel.
3.
Press to confirm.
a The time will begin to elapse.
a An audible signal sounds once the time has
elapsed.
Changing or switching off the Timer
1.
Touch .
2.
In the settings range, change the time or set to
to delete the time.
3.
Press to confirm.
8.3 Count-up timer
The stopwatch function displays the time that has
elapsed since activation.
Switching on Count-up timer
▶
Touch ⁠.
a The time will begin to elapse.
Switching off Count-up timer
1.
Touch . The stopwatch stops. The timer displays
remain lit.
2.
Touch . The displays go out.
PowerBoost
9 PowerBoost
You can use this function to heat up large volumes of
water more quickly than with ⁠.