English - 1
1 Switch lock
2 Saw dust ejector
3 Protective guard
4 Winged screw for cutting angle setting
5 Base plate
6 Riving knife
7 Swinging protective guard
8 Parallel guide
9 Speed selector thumbwheel
(PKS 54 CE / PKS 66 CE)
10 On/Off switch
11 Auxiliary handle
12 Spindle lock
13 Allen key
14 Cutting angle scale
15 Winged screw for cutting angle pre-selection
16 Winged screw for parallel guide
17 Cutting mark, 45°
18 Cutting mark, 0°
19 Drive spindle
20 Mounting flange
21 Clamping flange
22 Clamping bolt with washer
23 Clamping lever for cutting depth
pre-selection
24 Cutting depth scale
25 Riving knife attachment
Not all of the accessories illustrated or described are
included as standard delivery.
Tool Specifications
Hand Circular Saw PKS 54 PKS 54 CE PKS 66 PKS 66 CE
Part number 0 603 330 0.. 0 603 330 7.. 0 603 331 0.. 0 603 331 7..
Rated power 1 050 W 1 150 W 1 200 W 1 300 W
No-load speed 5 600 RPM 2 200 – 5 300 RPM 5 200 RPM 2 100 – 5 100 RPM
Speed under load 4 000 RPM 5 000 RPM 3 800 RPM 4 900 RPM
Riving knife thickness 1.8 mm 1.8 mm 2.0 mm 2.0 mm
Cutting depth at 90°, max. 54 mm 54 mm 66 mm 66 mm
Cutting depth at 45°, max. 38 mm 38 mm 48 mm 48 mm
Spindle lock • • • •
Speed selection – • – •
Constant electronics – • – •
Overload protection – • – •
Gradual, smooth starting
procedure
– • – •
Base plate 145 x 290 mm 145 x 290 mm 160 x 345 mm 160 x 345 mm
Weight (without
optional extras) approx.
3.6 kg 3.6 kg 4.8 kg 4.9 kg
Safety class / II / II / II / II
Saw blade dia. (max.) 160 mm 160 mm 190 mm 190 mm
Saw blade dia. (min) 150 mm 150 mm 184 mm 184 mm
Thickness of central
blade body, max.
1.7 mm 1.7 mm 1.8 mm 1.8 mm
Thickness of teeth/
max. crosscut
2.6 mm 2.6 mm 2.6 mm 2.6 mm
Thickness of teeth/
min. crosscut
2.0 mm 2.0 mm 2.1 mm 2.1 mm
Mounting hole 16 mm 16 mm 30 mm 30 mm
Machine Elements
PKS 54/66 Euro - Buch Seite 1 Dienstag, 17. Juni 2003 9:13 09
14 • 1 609 929 B67 • 03.06
mikosoft praha s.r.o.
mikosoft praha s.r.o.
mikosoft praha s.r.o.
mikosoft praha s.r.o.
To Next Page
Loading...
