16 | English
1 609 92A 0T4 | (14.10.14) Bosch Power Tools
Intended Use
The machine is intended for lengthways and crossways cut-
ting of wood with straight cutting lines as well as mitre cuts in
wood while resting firmly on the workpiece. With suitable saw
blades, thin-walled non-ferrous metals, e. g., profiles, can al-
so be sawed.
Working ferrous metals is not permitted.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Lock-off button for On/Off switch
2 On/Off switch
3 Auxiliary handle (insulated gripping surface)
4 Spindle lock button
5 Scale for mitre angle
6 Hex key
7 Wing bolt for bevel-angle preselection
8 Wing bolt for parallel guide
9 “CutControl” – Viewing window for cutting line
(PKS 55 A/PKS 55-2 A/PKS 66 A/PKS 66 AF/
PKS 66-2 AF)
10 Parallel guide
11 Retracting blade guard
12 Base plate
13 Lever for retracting blade guard
14 Wing bolt for bevel-angle preselection
15 Blade guard
16 Chip ejector
17 Handle (insulated gripping surface)
18 Clamping bolt with washer
19 Clamping flange
20 Saw blade*
21 Mounting flange
22 Saw spindle
23 Vacuum hose*
24 Deflection tube for chips
25 Dust/chip box*
26 Slider of dust/chip box
27 Clamping lever for cutting-depth preselection
28 Cutting-depth scale
29 Cutting mark, 45°
30 Cutting mark, 0°
31 Guide rail*
32 Button for guide-rail lock
33 Material clamp*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Circular Saw PKS 55 PKS 55 A
PKS 55-2 A
PKS 66 A
PKS 66 AF*
PKS 66-2 AF*
Article number
3 603 E00 0.. 3 603 E01 0.. 3 603 E02 0..
Rated power input
W12001200 1600
No-load speed
min
-1
5600 5600 5000
Cutting depth, max.
–for 0° bevel angle
–for 45° bevel angle
mm
mm
55
38
55
38
66
48
Spindle lock
CutControl
–
Dust/chip box
–
Base plate dimensions
mm 288 x 153 288 x 153 327 x 160
Saw blade diameter, max.
mm 160 160 190
Saw blade diameter, min.
mm 150 150 184
Blade thickness, max.
mm 1.8 1.8 1.8
Mounting bore
mm 20 20 30
Weight according to EPTA-Procedure 01/2003
kg 3.9 3.9 5.4
Protection class
/ II / II / II
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Starting cycles generate brief voltage drops. Interference with other equipment/machines may occur in case of unfavourable mains system conditions.
Malfunctions are not to be expected for system impedances below 0.36 ohm.
* PKS 66 AF/PKS 66-2 AF with guide rail
OBJ_BUCH-841-007.book Page 16 Tuesday, October 14, 2014 11:25 AM
To Next Page
Loading...
