To Next PageTo Next Page
Need help?Do you have a question about the Bosch PL1682 and is the answer not in the manual?
General| No Load Speed | 16, 500 RPM |
|---|---|
| Voltage | 120V |
| Planing Width | 82 mm |
| Planing Depth | 1 mm |
| Cord Length | 10 feet |
| Cutting Depth (Max) | 1 mm |
Guidance on maintaining a safe and clean workspace to prevent accidents.
Precautions for safe use of electrical power tools, focusing on plugs and cords.
Guidelines for operator alertness, protective equipment, and safe tool handling.
Warning about hazardous chemicals in dust from sanding, sawing, grinding, and drilling.
Explanation of symbols for Volts, Amperes, Hertz, Watts, Kilograms, Minutes, Seconds, and Current types.
Explanation of symbols for Off position, selector settings, arrows, tool construction, grounding, and warnings.
Designations for Li-ion and Ni-Cad battery recycling programs.
Symbols indicating to read the manual or wear eye protection.
Symbols indicating listing by Underwriters Laboratories, CSA, Intertek, and NOM Mexican Standards.
Identification of key parts and controls of the planer, including depth adjustment, trigger, and fences.
Specifications for planing depth, rabbeting depth, and planing width of the tool.
Instructions for connecting chip bags or shop vacuums for dust removal.
Information on handling, reversing, and replacing sharp and fragile planer blades.
Procedure for centering and securing the planer blade in the cutter drum.
Guidance on proper technique for holding and moving the planer during operation.
How to safely operate the ON/OFF trigger switch and lock-off button.
Guidance on setting cutting depth and feed rate based on material and desired finish.
Steps for attaching and adjusting the standard guide fence for width control.
How to use V-grooves on the base plate for beveling workpiece edges.
Instructions for attaching and adjusting the deluxe fence for angled cuts and beveling.
Procedure to set the depth for rabbeting using the optional depth stop accessory.
Guidance on professional servicing, avoiding unauthorized repairs, and bearing replacement.
Instructions for cleaning the tool safely and maintaining carbon brushes.
Inspection, replacement, and installation procedures for the drive belt.
Guidelines for choosing extension cords with adequate size conductors to prevent voltage drop and overheating.
Lists of standard and optional accessories for the planer.
Details of the one-year limited warranty, exclusions, and remedies for defects.
Information on limitations of implied warranties and exclusion of incidental/consequential damages.
Specifies warranty applicability for USA, Canada, and Puerto Rico.
