Functions viewed and/or controlled with the amplifier PC GUI configuration page:
Main page:
Figure 7.3: Amplifier GUI main screen
– Output levels for each amplifier channel.
– Fault monitoring.
– Mute per amplifier channel.
– Connect to device.
DSP setup page:
Figure 7.4: Amplifier GUI DSP setup screen
– Input mixer.
– Crossover.
– Parametric EQ – including Bass Enhancement on/off.
– Delay.
– DRC – Dynamic Range Compression.
– Output Level control.
See also
– Troubleshooting, page 41
30
en | Configuration PLENA matrix
2013-06 | V1.0 | Operation manual Bosch Security Systems B.V.
To Next Page
Loading...
