Bosch PLENA matrix - Page 48

– PLM‑4P125 130 W
– PLM‑4P220 220 W
Bridged (CH 1‑2 / 3‑4) (continous *):
– PLM‑4P125 250 W
– PLM‑4P220 385 W
Bridged (CH 1‑2 / 3‑4) (burst *):
– PLM‑4P125 250 W
– PLM‑4P220 445 W
THD+N (1 kHz, 6 dBFS):
– PLM‑4P125 0.1 %
– PLM‑4P220 0.03 %
Dynamic range (A‑weighted):
– PLM‑4P125 >101 dB
– PLM‑4P220 >102 dB
Frequency response (-1dB) 65 Hz to 20 kHz (+0/‑3 dB)
Crosstalk @ 1 kHz <-70 dB
* According to CEA‑490‑A R‑2008
Connectors
Inputs (wired in parallel): – 4x 3‑pin XLR balanced
– 4x 3‑pole balanced Phoenix
terminal (Metric)
– 1x RJ45 (Amp Link)
– Loudspeaker output 4x 3‑pole Phoenix terminal (Metric)
– Logic and standby overide 2‑pole Phoenix terminal (Metric)
Ethernet Network 10/100 Mbps RJ45
12 V output power for motion sensor 2‑pole Phoenix terminal (Metric)
48
en | Technical Data PLENA matrix
2013-06 | V1.0 | Operation manual Bosch Security Systems B.V.