Bosch PMF 180 E Multi User Manual

English | 17
Bosch Power Tools 2 609 004 835 | (12.5.10)
Assembly
Changing the Tool
f Before any work on the machine itself, pull
the mains plug.
f Wear protective gloves when changing appli-
cation tools/accessories.
Contact with the ap-
plication tool/accessoriy can lead to injuries.
Selecting the Application Tool/Accessory
The following table shows examples for application tools. Further application tools can be found in
the extensive Bosch accessories program.
Accessory Material Application
BIM segment
saw blade
Wooden materials,
plastic, non-ferrous
metals
Separating and plunge cuts; also for sawing
close to edges, in corners and hard to reach
areas;
Example: shortening already installed bottom
rails or door hinges, plunge cuts for adjusting
floor panels
Base plate
for sanding,
series Delta
93 mm
Depends on sand-
ing sheet
Sanding surfaces close to edges, in corners
or hard to reach areas;
Depending on the sanding sheet for, e.g.,
sanding wood, paint, varnish, stone
HCS plunge
cut saw blade,
wood
Wooden materials,
soft plastics
Separating and deep plunge cuts; also for
sawing close to edges, in corners and hard to
reach areas;
Example: narrow plunge cut in solid wood for
installing a ventilation grid
HCS plunge
cut saw
blades, wood
Wooden materials,
soft plastics
Smaller separating and plunge cuts;
Example: Cut-outs in furniture for cable con-
nections
BIM plunge
cut saw
blades, metal
Metal (e.g. unhard-
ened nails, screws,
smaller profiles),
non-ferrous metals
Smaller separating and plunge cuts;
Example: Shortening narrow profiles, cutting
fastening elements such as staples
HM-Riff seg-
ment saw
blade
Grouting joints, soft
wall tiles, glass-fi-
bre reinforces plas-
tic and other abra-
sive materials
Cutting and separating close to edges, in cor-
ners or hard to reach areas;
Example: Removing grouting joints between
wall tiles for repair work, cutting openings in
tiles, gypsum boards or plastic
HM-Riff delta
plate
Mortar, concrete re-
mainders, wood,
abrasive materials
Rasping and sanding on hard surfaces;
Example: Removing mortar or tile adhesive
(e.g. when replacing damaged tiles)
Scraper, rigid Carpets, coverings Scraping on hard surfaces;
Example: Removing carpet and tile adhesive
OBJ_BUCH-345-006.book Page 17 Wednesday, May 12, 2010 12:48 PM

Bosch PMF 180 E Multi Specifications

General

Idle speed (max)	21000 RPM
Soft grip	Yes
Input power	180 W
Output power	74 W
Power source	AC

Weight and Dimensions

Weight	1200 g