Bosch PMF 350 CES - Technical Data; Multifunction Tool Specifications; Noise;Vibration Information

English | 17
(1)
AutoClic lever for unlocking the application tool/ac-
cessory
(2)
On/off switch
(3)
Ventilation slots
(4)
Orbital stroke rate preselection thumbwheel
(5)
Thread for auxiliary handle
(6)
Auxiliary handle (insulated gripping surface)
(7)
180° light band
(8)
Tool holder
(9)
Plunge cut saw blade
a)
(10)
Sanding plate
a)
(11)
Sanding sheet
a)
(12)
Depth stop
a)
(13)
Segment saw blade
a)
(14)
Handle (insulated gripping surface)
(15)
Dust extraction hose
a)
(16)
Dust extraction adapter
a)
(17)
Dust extraction outlet
a)
(18)
Dust extraction system
a)
(19)
Clamping lever for dust extraction system
a)
a)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Multifunction tool PMF 350 CES
Article number
3603A022..
Orbital stroke rate preselec-
tion
●
Constant electronic control ●
Soft start ●
AutoClic tool holder ●
Rated power input W 350
Power output W 185
No-load speed n
0
min
−1
15000–20000
Oscillation angle on left/
right
° 1.4
Weight according to
EPTA-Procedure 01:2014
kg 1.6
Protection class
/ II
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Noise/Vibration Information
Noise emission values determined according to
EN62841‑2‑4.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 83dB(A); sound power level
94dB(A). Uncertainty K=3dB.
Wear hearing protection!
Working without the Auxiliary Handle
Total vibration values a
h
(triax vector sum) and uncertainty K
determined according to EN62841‑2‑4(Sanding),
EN62841‑2‑11(Cutting):
Sanding: a
h
=6m/s
2
, K=1.5m/s
2
,
Cutting with plunge cut saw blade: a
h
=10m/s
2
, K=2m/s
2
,
Cutting with segmential saw blade: a
h
=10m/s
2
, K=3m/s
2
,
Scraping: a
h
=10m/s
2
, K=1.5m/s
2
.
Working with the auxiliary handle
Total vibration values a
h
(triax vector sum) and uncertainty K
determined according to EN62841‑2‑4(Sanding),
EN62841‑2‑11(Cutting):
Sanding: a
h
=5m/s
2
, K=1.5m/s
2
,
Cutting with plunge cut saw blade: a
h
=13m/s
2
, K=3m/s
2
,
Cutting with segmential saw blade: a
h
=12m/s
2
, K=3m/s
2
,
Scraping: a
h
=12m/s
2
, K=1.5m/s
2
.
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
u Pull the plug out of the socket before carrying out any
work on the power tool.
Changing the tool
u Wear protective gloves when changing tools. There is
a risk of injury when touching the application tools.
Selecting an Application Tool
Please observe the application tools intended for your power
tool.
Application tool PMF 350 CES
Bosch Power Tools 1 609 92A 84H | (08.07.2022)