English – 2
(4)
PowerTube battery (pivot)
(5)
Socket for charging connector
(6)
Operation/battery charge indicator
(7)
On/off button
(8)
PowerTube battery safety restraint
(9)
Locking mechanism
(10)
Pull strap
(11)
Axial rail
(12)
PowerTube battery (axial)
(13)
Upper axial PowerTube holder
(14)
Upper holder for PowerPack battery
(15)
PowerPack battery
(16)
Lower holder for PowerPack battery
(socket without charging option)
(17)
Lower holder for PowerPack battery
(socket with charging option)
(18)
Charger
(19)
Charging socket cover
Technical data
Li-ion battery PowerTube500 PowerTube625 PowerTube750
Product code Horizontal BBP3750 BBP3760 BBP3770
Product code Vertical BBP3751 BBP3761 BBP3771
Rated voltage V= 36 36 36
Nominal capacity Ah 13.4 16.7 20.1
Energy Wh 500 625 750
Operating temperature °C –5to+40 –5to+40 –5to+40
Storage temperature °C +10to+40 +10to+40 +10to+40
Permitted charging temperature range °C 0to+40 0to+40 0to+40
Weight, approx. kg 3.0 3.6 4.3
Protection rating IP54 IP54 IP54
Li-ion battery PowerPack 545 PowerPack 725
Product code BBP3551 BBP3570
Rated voltage V= 36 36
Nominal capacity Ah 14.4 19.2
Energy Wh 545 725
Operating temperature °C –5to+40 –5to+40
Storage temperature °C +10to+40 +10to+40
Permitted charging temperature range °C 0to+40 0to+40
Weight, approx. kg 3.0 4.0
Protection rating IP54 IP54
Fitting
u Ensure the battery is placed on clean surfaces only.
Avoid getting dirt, e.g. sand or soil, in the charging socket
and contacts in particular.
Testing the battery before using it for the first
time
Test the battery before charging it for the first time or using
it in your eBike.
To do this, press the on/off button (7) to switch the battery
on. If none of the LEDs on the battery charge indicator (6)
light up, the battery may be damaged.
If at least one (but not all) of the LEDs on the battery charge
indicator (6) lights up, the battery will need to be fully
charged before using it for the first time.
u Do not charge or use batteries if they are damaged.
Contact an authorised bicycle dealer.
Charging the battery
u A Bosch eBike battery must only be charged using an
original Bosch eBike charger.
Note: The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
before using it for the first time.
0 275 007 3PX | (25.05.2022) Bosch eBike Systems