Bosch PR20EVSK - Router Bits Edge Forming Bits; Carbide Tipped 60 Degree Lettering Bit; Carbide Tipped Chair Mat Bit; Solid Carbide Bevel Trimmer Bit

125
Toll Free: 877-BOSCH-99
Boschtools.com
Router 
Carbide Tipped 60 Degree Lettering Bit
Suitable for door-front grooving, lettering, and sign work with a 60 degree
angle for sharp, highly readable v-groove lettering.
A
D
C
B
Carbide Tipped Chair Mat Bit
Micrograin control cut bit to cut out and edge form chair mats and other items
fabricated from softer plastic such as vinyl and acrylic in a single operation.
Bit is designed to help minimize edge cracking in such materials and is also
suitable for use with 1/4" and thinner wood and plywood.
A
D
F
E
C
B
Carbide Tipped Cove Bit
One bit produces multiple designs by adjusting the bit height for grooving or
mouldings with a decorative layered effect.
A
D
C
B
Item #
A.
Overall
Diameter
B.
Cutting
Edge Length
C.
Shank
Diameter
D.
Overall
Length
85540M 1" 3/4" 1/4" 2-1/2"
Bits
Item #
A.
Overall
Diameter
B.
Cutting
Edge Length
C.
Shank
Diameter
D.
Overall
Length
84530 1-1/4" 49/64" 1/2" 2-25/64"
Item #
A.
Overall
Diameter
B.
Cutting
Edge Lgth.
C.
Shank
Diameter
D.
Overall
Length
E.
Bearing
Diameter
F.
Radius
85612M 47/64" 17/32" 1/4" 2-7/32" 47/62" 3/32"
Bits
Solid Carbide Bevel Trimmer Bit
Provides a 7-1/2° bevel on the trim edge of plastic laminate surfaces.
The self-pilot eliminates guide assembly.
A
D
C
B
E
Solid Carbide Flush Trimmer Bit
Self-piloting bit makes flush, trim and edge cuts.
A
D
C
B
Item #
A.
Overall
Diameter
B.
Cutting
Edge Lgth.
C.
Shank
Diameter
D.
Overall
Length
E.
Angle
Quantity
85286 1/4" 1/4" 1/4" 1-1/2" 7-1/2° 1
85286B100 1/4" 1/4" 1/4" 1-1/2" 7-1/2° 100
Item #
A.
Overall
Diameter
B.
Cutting
Edge Lgth.
C.
Shank
Diameter
D.
Overall
Length Angle Quantity
85285 1/4" 1/4" 1/4" 1-1/2" 7-1/2° 1
85285B100 1/4" 1/4" 1/4" 1-1/2" 7-1/2° 100
Combination Flush & Bevel Trimmer Bits
Micrograin bits combine bevel or flush trim cuts in a single bit.
Use with router guide assembly.
• 85288 is a solid carbide steel bit
• 85261M is a carbide tipped bit
A
D
C
B
A
D
C
B
Item #
A.
Overall
Diameter
B.
Cutting
Edge Lgth.
C.
Shank
Diameter
D.
Overall
Length Type of Cut
85261M 1/2" 1/2" 1/4" 1-3/4" Flush or 22° bevel
85288 1/4" 3/8" 1/4" 1-1/2" Flush or 10° bevel