Bosch PR20EVSK - Router Bits Cabinetry;Joinery Bits; Carbide Tipped Bevel Vertical Panel Raiser Bit; Carbide Tipped Raised Panel Cutters; Carbide Tipped Ogee Vertical Panel Raiser Bit

132
Boschtools.com
Toll Free: 877-BOSCH-99
Bits
Carbide Tipped Bevel Vertical Panel Raiser Bit
Micrograin control cut bit for creating raised panel doors and drawer faces.
• Recommended for use with a router table. Minimum recommended panel
thickness is 3/4"
A
D
C
B
Item #
A.
Overall
Diameter
B.
Cutting
Edge Length
C.
Shank
Diameter
D.
Overall
Length
84520M 1-1/8" 1-5/8" 1/2" 3-1/8"
Carbide Tipped Ogee Raised Panel Cutters
Micrograin bits produce raised panel cuts along straight and curved panel edges.
• These bits are not for use in hand-held routers. Use with a router table only.
Minimum recommended panel thickness is 3/4"
A
D
E
F
C
B
Carbide Tipped Ogee Vertical Panel Raiser Bit
Micrograin bit used to create beautiful shadow lines for cabinet doors.
• Recommended for use with a router table. Minimum recommended panel
thickness is 3/4"
A
D
E
C
B
Item #
A.
Overall
Diameter
B.
Cutting
Edge Length
C.
Shank
Diameter
D.
Overall
Length
E.
Small
Diameter
85712M 1-3/16" 1-5/8" 1/2" 3-1/8" 7/16"
A
D
E
F
C
B
Carbide Tipped Cove Raised Panel Cutter
Micrograin control cut bit used to create clean, simple lines to accentuate
a surface.
• Recommended for use with a router table. Minimum recommended panel
thickness is 3/4"
Item #
A.
Overall
Dia.
B.
Cutting
Edge Lgth.
C.
Shank
Dia.
D.
Overall
Lgth.
E.
Bearing
Dia.
F.
Radius Cutting
Width
85641M 3-3/8" 1/2" 1/2" 2-3/8" 1/2" 1-9/16" 1-7/16"
Item #
A.
Overall
Dia.
B.
Cutting
Edge Lgth.
C.
Shank
Dia.
D.
Overall
Lgth.
E.
Bearing
Dia.
F.
Radius Cutting
Width
85638M 2-5/8" 5/8" 1/2" 2-1/2" 1/2" 3/4" 1-1/16"
85640M 3-3/8" 9/16" 1/2" 2-1/2" 1/2" 7/8" 1-7/16"
Carbide Tipped Raised Panel Cutters
Micrograin bits produce raised panel cuts along straight and curved panel edges.
• These bits are not for use in hand-held routers. Use with a router table only.
Minimum recommended panel thickness is 3/4"
A
D
E
F
C
B
Item #
A.
Overall
Dia.
B.
Cutting
Edge Lgth.
C.
Shank
Dia.
D.
Overall
Length
E.
Bearing
Dia.
F.
Angle Cutting
Width
85637M 2-3/4" 5/8" 1/2" 2-17/32" 1/2" 26° 1-1/8"
85639M 3-3/8" 1/2" 1/2" 2-3/8" 1/2" 15° 1-7/16"
Carbide Tipped Doorlip Bit
Micrograin bit achieves a popular shaper-quality doorlip cut with a router.
• Recommended for use with a router table
A
D
E
F
C
B
Carbide Tipped Finger Pull Bit
Micrograin control cut bit creates easy open door or drawer edges that
eliminate metal pulls and enhance the hardwood effect.
• Recommended for use with a router table
A
D
C
B
Item #
A.
Overall
Diameter
B.
Cutting
Edge Lgth.
C.
Shank
Diameter
D.
Overall
Length
E.
Radius
85603M 1-9/16" 1" 1/2" 3" 3/8"
Item #
A.
Overall
Diameter
B.
Cutting
Edge Length
C.
Shank
Diameter
D.
Overall
Length
84540M 1-9/16" 7/16" 1/4" 2-1/4"
Router 