Do you have a question about the Bosch Professional GBH 240 and is the answer not in the manual?
Power | 790 W |
---|---|
Rated Input Power | 790 W |
Impact Energy | 2.7 J |
No-load Speed | 0 - 900 rpm |
Rated Speed | 0 - 900 rpm |
Impact Rate | 0 - 4000 bpm |
Tool Holder | SDS plus |
Drilling Diameter in Steel | 13 mm |
Drilling Diameter in Wood | 30 mm |
Drilling Diameter in Concrete with Hammer Drill Bits | 4-24 mm |
Optimum Range of Application in Concrete with Hammer Drill Bits | 14 mm |
Precautions for electrical connections and wet environments.
Operator alertness, protective equipment, and attire.
Guidelines for tool operation, maintenance, and storage.
Specific safety advice for hammer functions.
Defines the tool's intended applications and limitations.
Lists and describes the main features of the product.
Provides detailed specifications and performance data for the tool.
Instructions for attaching and positioning the auxiliary handle.
How to set the depth stop for precise drilling.
Procedures for swapping drill chucks and bits.
Procedures for removing and inserting key type drill chucks.
Procedures for removing and inserting quick change chucks.
How to insert and remove SDS-plus drilling tools.
Procedures for using tools without SDS-plus shanks.
Mounting and using the dust extraction accessory.
How to safely start and operate the power tool.
Selecting operating modes like drilling, hammer drilling, or chiselling.
How to change the tool's rotation direction.
Instructions for switching the tool on, off, and locking the switch.
How to control the tool's speed and impact frequency.
Explanation of the overload clutch function and safety.
General tips for safe and effective tool usage.
Guidelines for cleaning and maintaining the tool.
Information on customer support, repairs, and spare parts.