To Next PageTo Next Page
Need help?Do you have a question about the Bosch Professional GBH 4 DFE and is the answer not in the manual?
General| Drilling Diameter in Steel | 13 mm |
|---|---|
| Drilling Diameter in Wood | 30 mm |
| No Load Speed | 0 - 900 rpm |
| Tool holder | SDS plus |
| Drilling diameter in concrete with core cutters | 68 mm |
| Impact Rate | 0 - 4, 000 bpm |
Maintain a clean, well-lit workspace to prevent accidents and hazards.
Follow precautions for power cords, plugs, and avoiding electrical hazards.
Stay alert, use PPE, and prevent unintentional starting for user protection.
Ensure proper usage, maintenance, and storage for safe operation.
Service tools with qualified personnel and original parts only.
Key safety advice: hearing protection, auxiliary handle, utility lines, and proper handling.
Specifies the machine's purpose for hammer drilling and light chiselling.
Identifies the tool's main parts and features.
Presents measured noise and vibration levels according to EN 60745.
Steps for assembling and preparing the tool before use.
Positioning and using the auxiliary handle for stability.
Setting the depth stop for precise drilling depth control.
Choosing and changing SDS-plus and keyless chucks.
Securely attaching the SDS-plus tool holder.
Inserting and removing SDS-plus and non-SDS-plus drill bits.
Instructions for starting the tool and selecting operating modes.
How to adjust speed and impact rate using the On/Off switch.
Using the thumbwheel for stepless speed and impact preselection.
Keeping the machine clean and identifying service indicators.
Information on obtaining service, repairs, and spare parts.
Proper disposal of electrical tools according to EU guidelines.
