1 609 929 M75 | (12.11.07) Bosch Power Tools
6 | English
Technical Data
Product Features
The numbering of the product features refers to
the illustration of the power tool on the graphics
page.
1 Suspension hook
2 Auxiliary handle
3 Thread for auxiliary handle
4 On/Off switch
5 Rotational direction switch
6 Tool holder
7 Tool bit
Illustrated or described accessories are not included
as standard delivery.
Assembly
Changing the Tool
f Before any work on the power tool itself,
pull the mains plug.
f When you install the tool bit, take care that
the tool bit is seated securely on the tool bit
holder. If the tool bit is not joined securely to
the tool bit holder, it may become loose and it
may no longer be controllable.
Slide the application tool 7 onto the square drive
of the tool holder 6.
Impact Wrench GDS 24
Professional
GDS 30
Professional
Article number
0 601 434 1.. 0 601 435 1..
Rated power input
W 800 920
Output power
W 400 500
No-load speed
rpm 1260 1260
Max. torque for hard/soft screwdriving application
according to ISO 5393
Nm 600/300 1000/500
Right/left rotation
z z
Max. screw dia.
M 24 M 30
Tool holder
¾" 1"
Weight according to EPTA-Procedure 01/2003
kg 5.7 7.3
Protection class
/ II / II
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltages and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your power tool. The trade names of individual tools may vary.
OBJ_BUCH-550-001.book Page 6 Monday, November 12, 2007 4:54 PM
To Next Page
Loading...
