Bosch Professional GHO 26-82 D - Intended Use; Product Features; Technical Data; Noise;Vibration Information

English | 13
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for planing wood-based materials
such as beams and boards while resting firmly on the work-
piece. It is also suitable for chamfering edges and for rebat-
ing.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Cutting depth scale
(2)
Knob for setting the cutting depth (insulated gripping
surface)
(3)
Chip ejector (GHO26-82D: Either right or left)
(4)
Lock-off function for on/off switch
(5)
On/off switch
(6)
Changeover lever for chip ejector direction
(GHO26-82D)
(7)
Planer base plate
(8)
V-groove
(9)
Handle (insulated gripping surface)
(10)
Blade head
(11)
Clamping element for planer blade
(12)
Fastening screw for planer blade
(13)
HM/TC planer blade
(14)
Hex key
(15)
Extraction hose (dia. 35mm)
A)
(16)
Chip/dust bag
A)
(17)
Parallel guide
(18)
Scale for rebate width
(19)
Locking nut for rebate width setting
(20)
Fastening screw for parallel/angle guide
(21)
Angle guide
A)
(22)
Locking nut for angle setting
(23)
Fastening screw for rebate depth guide
(24)
Rebate depth guide
A)
(25)
Parking rest
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Planer GHO 16-82 GHO 26-82 D
Article number
3601EA40.. 3601EA43..
Rated power input W 630 710
No-load speed min
-1
18,000 18,000
Cutting depth mm 0–1.6 0–2.6
Rebate depth mm 0–9 0–9
Max. planing width mm 82 82
Weight according to EPTA-Procedure01:2014 kg 3.4 3.4
Protection class
/ II / II
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-
specific models.
Noise/vibration information
Noise emission values determined according to
EN62841-2-14.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 84dB(A); sound power level
95dB(A). Uncertainty K=3dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN62841-2-14
a
h
=8m/s
2
, K=1.5m/s
2
,
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Bosch Power Tools 1 609 92A 4LF | (05.11.2020)