To Next PageTo Next Page
Need help?Do you have a question about the Bosch Professional GMF 1600 CE and is the answer not in the manual?
Details the power tool's intended use for routing grooves, edges, and profiles in various materials.
Lists and describes the numbered parts and components of the power tool.
Instructions for attaching the motor unit to the plunge or non-plunge base.
Steps for detaching the motor unit from the plunge or non-plunge base.
Details how to attach the dust extraction adapter to the plunge base.
Details how to attach the dust extraction adapter to the non-plunge base.
Instructions for connecting a dust extraction hose and system to the tool.
Guide for setting the required speed using the speed preselection thumbwheel.
Procedure for setting the rough and fine routing depth on the plunge base.
Instructions on how to operate the on/off switch and lock-on button.
Explanation of the Constant Electronic feature for consistent performance.
Information on the electronic soft start feature for motor longevity.
Guidance on setting the routing depth when the power tool is switched off.
Guidelines on correct routing direction to avoid kickback and ensure safety.
Procedure for routing with the plunge base, including depth setting.
Instructions for routing with the non-plunge base, ensuring proper bit protrusion.
Using a board or straight edge as an auxiliary guide for large workpieces.
Techniques for edge and profile routing using pilot pins or ball bearings.
Steps for setting up and using the parallel guide for precise routing.
Instructions for performing circular routing work using a router compass.
Procedure for aligning the guide bushing and guide plate for uniform distance.
Instructions for keeping the tool clean and ensuring safe operation.
Details the power tool's intended use for routing grooves, edges, and profiles in various materials.
Lists and describes the numbered parts and components of the power tool.
Instructions for attaching the motor unit to the plunge or non-plunge base.
Steps for detaching the motor unit from the plunge or non-plunge base.
Details how to attach the dust extraction adapter to the plunge base.
Details how to attach the dust extraction adapter to the non-plunge base.
Instructions for connecting a dust extraction hose and system to the tool.
Guide for setting the required speed using the speed preselection thumbwheel.
Procedure for setting the rough and fine routing depth on the plunge base.
Instructions on how to operate the on/off switch and lock-on button.
Explanation of the Constant Electronic feature for consistent performance.
Information on the electronic soft start feature for motor longevity.
Guidance on setting the routing depth when the power tool is switched off.
Guidelines on correct routing direction to avoid kickback and ensure safety.
Procedure for routing with the plunge base, including depth setting.
Instructions for routing with the non-plunge base, ensuring proper bit protrusion.
Using a board or straight edge as an auxiliary guide for large workpieces.
Techniques for edge and profile routing using pilot pins or ball bearings.
Steps for setting up and using the parallel guide for precise routing.
Instructions for performing circular routing work using a router compass.
Procedure for aligning the guide bushing and guide plate for uniform distance.
Instructions for keeping the tool clean and ensuring safe operation.
General| Brand | Bosch |
|---|---|
| Model | Professional GMF 1600 CE |
| Category | Wood Router |
| Language | English |
