Bosch Professional LR 30 - Safety, Product Description, and Specifications; Safety Instructions; Intended Use; Product Features and Technical Data

English | 5
English
Safety instructions
All instructions must be read and observed.
The safeguards integrated into the measur-
ing tool may be compromised if the measur-
ing tool is not used in accordance with these
instructions. STORE THESE INSTRUCTIONS IN A SAFE
PLACE.
u Have the measuring tool serviced only by a qualified
specialist using only original replacement parts. This
will ensure that the safety of the measuring tool is main-
tained.
u Do not use the measuring tool in explosive atmo-
spheres which contain flammable liquids, gases or
dust. Sparks may be produced inside the measuring tool,
which can ignite dust or fumes.
u When operating the measuring tool, loud signal tones
may sound under certain circumstances. For this
reason, keep the measuring tool away from your ears
and from other persons. The loud sound can damage
hearing.
Keep the magnet away from implants and
other medical devices, e.g. pacemakers or
insulin pumps. The magnetgenerates a field
that can impair the function of implants and
medical devices.
u Keep the measuring tool away from magnetic storage
media and magnetically-sensitive devices. The effect
of the magnets can lead to irreversible data loss.
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The laser receiver is intended to quickly find rotating laser
beams of the wavelength specified in the technical data.
The laser receiver is suitable for indoor and outdoor use.
Product Features
The numbering of the product features refers to the illustra-
tion of the laser receiver on the graphics page.
(1)
Holder
(2)
Centre line reference on the holder
(3)
Fastening screw of the holder
(4)
Mount for holder
(5)
Magnets
(6)
"Laser beam below centre line" LED direction indic-
ator
(7)
LED for centre line
(8)
"Laser beam above centre line" LED direction indic-
ator
(9)
Battery compartment cover
(10)
Serial number
(11)
Battery compartment cover locking mechanism
(12)
Spirit level for holder
(13)
Rotary knob of holder
(14)
Audio signal button
(15)
Centre mark
(16)
Button for adjusting the reception accuracy
(17)
On/off button
(18)
Laser beam reception area
(19)
Speaker
(20)
Measuring rod
A)
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Laser receiver LR 30
Article number
3601K692..
Receivable wavelength 635−650nm
Working range
A)
with rotary laser 1–150m
Reception angle 45°
Receivable rotation speed 150/300/600min
−1
Reception accuracy
B)C)
– "Exact" ±1.5mm
– "Mid-range" ±3mm
Operating temperature –10°C to +50°C
Storage temperature –20°C to +70°C
Max. altitude 2000m
Relative air humidity max. 90%
Pollution degree according to
IEC61010-1
2
D)
Battery 1×9V6LR61
Approx. operating time 30h
Weight according to
EPTA-Procedure01:2014
0.34kg
Bosch Power Tools 1 609 92A 52L | (22.11.2019)