To Next PageTo Next Page
Need help?Do you have a question about the Bosch PSR 1440 LI-2 and is the answer not in the manual?
General| Soft grip | Yes |
|---|---|
| Chuck type | Keyless |
| Product design | Pistol grip drill |
| Number of gears | 2 |
| Torque settings | 21 |
| Screw diameter (max) | 8 mm |
| Idle speed (1st gear) | 400 RPM |
| Idle speed (2nd gear) | 1350 RPM |
| Maximum torque (hard applications) | 34 N⋅m |
| Maximum torque (soft applications) | 17 N⋅m |
| Vibration emission | 2.5 m/s² |
| Product color | Black, Green |
| Power source | Battery |
| Battery voltage | 14.4 V |
Weight and Dimensions| Weight | 1150 g |
|---|
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Power tool plugs must match the outlet. Avoid body contact with earthed or grounded surfaces.
Stay alert, watch what you are doing and use common sense. Use personal protective equipment.
Use the correct power tool for your application. Prevent unintentional starting and overreaching.
Maintain power tools, keep cutting tools sharp and clean. Ensure proper function before use.
Recharge only with specified charger. Protect battery from heat, moisture, and damage.
Warnings regarding wiring, auxiliary handles, hidden lines, tool jamming, workpiece security, and battery handling.
Advice on dust hazards, ventilation, battery charging, and tool operation to prevent accidents.
Explanation of the LED indicators for battery charge level and overload protection.
Explains important symbols used in the manual for safe and effective tool operation.
Instructions for removing and inserting the battery.
Steps for mounting tools, reversing rotation, setting torque, and selecting positions.
Guidance on gear selection, switching the tool on/off, and checking battery status.
Information on choosing appropriate accessories for the tool.
Keep the machine and ventilation slots clean. Clean tools, holders, and slots after each use.
Dispose of machine, batteries, accessories, and packaging environmentally friendly.
Illustration showing the process of removing the battery from the tool.
Illustration showing the process of inserting the battery into the tool.
Illustration demonstrating how to mount drilling or screwdriving accessories.
Illustration showing how to change the rotation direction of the tool.
Illustration demonstrating how to adjust the torque setting on the tool.
Illustration showing how to select the correct drilling position.
Illustration demonstrating the mechanical gear selection for the tool.
Illustration showing the operation of the On/Off switch and gear selection.
Illustration showing how to check the battery charge condition using LEDs.
