17. Shock protection guard
18. Saw blade receptacle
19. Worklight
20. Handle (insulated gripping surface)
21. Anti-splinter guard
22. Guide for the parallel guide
23. Scale for miter/bevel angles
24. Base plate screw
25. 0° cut mark
26. 45° cut mark
27. Locking screw for the parallel guide
28. Parallel guide with a circle cutter
29. Circle cutter centering tip
a) Accessories shown or described are not included with the product as standard. You can find the
complete selection of accessories in our accessories range.
Jigsaw PST 18 LI
Article number 3 603 K11 0..
Stroke rate control ●
Pendulum action ●
Rated voltage V= 18
No-load stroke rate n₀
min
−1
0−2400
Stroke mm 20
Max. cutting depth
– in wood mm 80
– in aluminum mm 12
– in steel (unalloyed) mm 5
Max. cutting angle (left/right) ° 45
Weight according to EPTA-Procedure 01:2014 A) kg
2.0 (1.5 Ah)–
2.3 (6.0 Ah)
Recommended ambient temperature during
charging
°C 0 to +35
Permitted ambient temperature during operation B)
and during storage
°C –20 to +50
Recommended rechargeable batteries C) PBA 18V…W-.
Recommended battery chargers AL 18…
A) Depends on battery in use
B) Limited performance at temperatures <0 °C
C) The following chargers are not compatible with the PBA rechargeable battery: AL 1814 CV, AL 1820 CV, AL 1860
CV
Noise/Vibration Information
To Next Page
Loading...
