be damaged, break or cause kickback.
Only use the power tool with the base plate. If you do not use the base plate, you are at risk of not being
able to control the power tool.
Use suitable detectors to determine if there are hidden supply lines or contact the local utility company
for assistance. Contact with electric cables can cause fire and electric shock. Damaging gas lines can lead to
explosions. Breaking water pipes causes property damage.
In case of damage and improper use of the battery, vapors may be emitted. The battery can set alight or
explode. Ensure the area is well ventilated and seek medical attention should you experience any adverse
effects. The vapors may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuiting.
The battery can be damaged by pointed objects such as nails or screwdrivers or by force applied
externally. An internal short circuit may occur, causing the battery to burn, smoke, explode or overheat.
Only use the battery with products from the manufacturer. This is the only way in which you can protect
the battery against dangerous overload.
Protect the battery against heat, e.g. against continuous intense sunlight, fire, dirt, water, and
moisture. There is a risk of explosion and short-circuiting.
Product Description and Specifications
Read all the safety and general instructions.
Failure to observe the safety and general instructions may result in electric shock, fire, and/or serious injury. Please
observe the illustrations at the beginning of this operating manual.
Intended Use
The power tool is intended for making separating cuts and cut-outs in wood, plastic, metal, ceramic plates, and
rubber while resting firmly on the workpiece. It is suitable for straight and curved cuts with miter/bevel angles of up to
45°. Note the saw blade recommendations.
Product features
The numbering of the product features refers to the diagram of the power tool on the graphics page.
1. Lock-off function for on/off switch
2. On/off switch
3. Battery charge indicator
4. Rechargeable battery
5. Battery release button
6. Dust extraction adapter
7. Extraction Hose
8. Extraction outlet
9. Saw blade storage compartment
10. Baseplate
11. Orbital action adjusting lever
12. Hood for extraction attachment
13. Guide roller
14. The base for Cut Control
15. Saw blade
16. Viewing window for Cut Control
To Next Page
Loading...
Need help?
General
Weight and Dimensions
