Bosch PST 7000 E - Page 13

English | 13
(9)
Saw blade
a)
(10)Viewing window for CutControl
a)
(11)Base for CutControl
a)
(12)
Shock protection guard
(13)
Handle (insulated gripping surface)
(14)
Saw blade receptacle
(15)
Anti-splinter guard
a)
(16)
Accessory holder
(17)
Bracket for guide roller
(18)
Base plate screw
(19)
Scale for mitre/bevel angles
(20)
0° cut mark
a)
(21)
45° cut mark
a)
a)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
JigsawPST 700 EPST 7000 EPST 7200 E
Article number
3603CA00.. 3603CA00.. 3603CA00..
CutControl
●●●
Stroke rate control●●●
Rated power inputW500500500
Power outputW300300300
No-load stroke rate n
0
min
–1
500–3100500–3100500–3100
Strokemm202020
Max. cutting depth
–in woodmm707072
–in aluminiummm101010
–in steel (unalloyed)mm444
Max. cutting angle (left/right)°454545
Weight according to EPTA-Procedure 01:2014kg1.61.61.6
Protection class
/II /II /II
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/Vibration Information
Noise emission values determined according to
EN62841‑2‑11.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 88dB(A); sound power level
99dB(A). Uncertainty K=5dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN62841‑2‑11:
Cutting boards with saw bladeT144D:
a
h,B
= 10m/s
2
, K = 3m/s
2
,
cutting sheet metal with saw blade T118A:
a
h,M
= 11m/s
2
, K = 3m/s
2
.
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
u Pull the plug out of the socket before carrying out any
work on the power tool.
Inserting/changing the saw blade
u When fitting or changing the saw blade, wear protect-
ive gloves. Blades are sharp and can become hot when
used for prolonged periods of time.
Selecting the saw blade
You will find an overview of recommended saw blades at the
end of these operating instructions. Only use saw blades
Bosch Power Tools1 609 92A 67X | (25.02.2021)