To Next PageTo Next Page
Need help?Do you have a question about the Bosch PST 7500 PE and is the answer not in the manual?
General| Stroke Length | 20 mm |
|---|---|
| Cutting Depth in Wood | 75 mm |
| Bevel Angle | 45° |
| Stroke Rate | 500 - 3100 spm |
| Stroke rate at no load | 500 - 3100 spm |
| Sound Pressure Level | 88 dB(A) |
Insert blade into stroke rod until latched; turn SDS lever to release and eject.
Slide dust cover into or out of the guide to attach or remove it.
Connect the vacuum hose to the connection piece for dust extraction during operation.
Switch the machine on/off and adjust stroke rate continuously or preselect it.
Utilize the sawdust blower for clear cuts and adjust pendulum action for optimized cutting.
Adjust cutting angle and offset foot plate for precise bevel cuts and sawing close to edges.
Use splintering protector, cooling agents, and plunge sawing for enhanced cutting performance and finish.
Follow safety for dust, plugs, cleaning, lubrication, and ensure proper repair procedures.
