Bosch PTS 10 User Manual

Robert Bosch GmbH
Power Tools Division
D-70745 Leinfelden-Echterdingen
Germany
www.bosch-pt.com
1 609 929 T49 (2009.12) PS / 486 UNI
PTS 10
de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke
gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήσης
tr Orijinal işletme talimat
pl Instrukcja oryginalna
cs Původní návod k používání
sk Pôvodný návod na použitie
hu Eredeti használati utasítás
ru Оригинальное руководст-
во по эксплуатации
uk Оригінальна інструкція з
експлуатації
ro Instrucţiuni originale
bg Оригинална инструкция
sr Originalno uputstvo za rad
sl Izvirna navodila
hr Originalne upute za rad
et Algupärane kasutusjuhend
lv Instrukcijas oriģinālvalodā
lt Originali instrukcija
OBJ_DOKU-13692-003.fm Page 1 Tuesday, November 24, 2009 4:19 PM

Bosch PTS 10 Specifications

General

Input power	1400 W
Power source	AC
Blade bore	30 mm
Blade diameter	254 mm
Idle speed (max)	5000 RPM

Weight and Dimensions

Weight	23500 g

Summary

General Power Tool Safety Warnings

Work Area Safety

Ensuring a clean, well-lit, and safe work environment to prevent accidents.

Electrical Safety

Guidelines for safe use of electrical power tools, plug integrity, and avoiding shock.

Personal Safety

Recommendations for operator alertness, protective equipment, and proper attire.

Safety Warnings for Table Saws

Assembly

Assembly from Below

Instructions for mounting the vacuum hose and bottom plate onto the power tool.

Assembly from Above

Assembly Steps

Assembly Procedures

Mounting Riving Knife, Blade Guard, and Table Extension

Mounting Angle Stop and Auxiliary Fence

Mounting the Parallel Guide

Parallel Guide and Auxiliary Fence Mounting

Stationary or Flexible Mounting

Mounting Options

Changing the Saw Blade

Procedure for safely removing and mounting the saw blade, including precautions.

Operation

Saw Blade Positioning and Table Size

Cutting Angle Adjustments

Setting horizontal mitre and vertical bevel angles using the machine's adjustment mechanisms.

Adjusting Cutting Angles

Starting and Stopping Operation

Adjusting Parallel Fences

Parallel Fence and Auxiliary Fence Adjustment

Adjusting Mitre Angles and Angles

Mitre Angles with Sliding Table and Standard Angles

Maintenance and Service