English | 19
Bosch Power Tools 1 609 929 M21 | (22/8/07)
Technical Data
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the prod-
uct are: Sound pressure level 85 dB(A); Sound
power level 98 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
h
=2,5 m/s
2
, Uncertain-
ty K =1,5 m/s
2
.
The vibration emission level given in this informa-
tion sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another. It
may be used for a preliminary assessment of ex-
posure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with differ-
ent accessories or poorly maintained, the vibra-
tion emission may differ. This may significantly
increase the exposure level over the total work-
ing period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
Declaration of Conformity
We declare under our sole responsibility that the
product described under “Technical Data” is in
conformity with the following standards or
standardization documents: EN 60745 according
to the provisions of the directives 2004/108/EC,
98/37/EC (until Dec. 28, 2009), 2006/42/EC
(from Dec. 29, 2009 on).
Technical file at:
Robert Bosch GmbH, Dept. PT/ESC,
D-70745 Leinfelden-Echterdingen
22.08.2007, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Compact Belt Sander PVS 300 AE
Article number
0 603 327 7..
Rated power input
W 300
Output power
W 150
No-load belt speed
m/min 180 – 250
Sanding belt length
mm 303
Sanding belt width
mm 40
Weight according to
EPTA-Procedure
01/2003
kg 1,6
Protection class
/II
The values given are valid for nominal voltages [U] of 230/240 V.
For lower voltage and models for specific countries, these values
can vary.
Please observe the article number on the type plate of your ma-
chine. The trade names of the individual machines may vary.
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
OBJ_BUCH-472-001.book Page 19 Wednesday, August 22, 2007 5:20 PM
To Next Page
Loading...
