Bosch PVS F Series Instruction Manual And Installation Instructions

Positioning and connecting en
15
1. Take the hoses out of the holders.
2. Unscrew and remove all four
transport brace screws.
Remove the sleeves. To do this,
remove the mains cable from the
holders.
3. Fit the covers. Lock the covers firmly
in place by applying pressure to the
snap-in hooks.
Hose and cable lengths
■ Left-hand connection
■ Right-hand connection
Tip: The following are available from
specialist dealers/the after-sales
service:
■ An extension for Aqua-Stop or cold
water supply hose (approx. 2.50 m);
order no. WMZ2380, WZ10130,
CZ11350, Z7070X0
■ A longer supply hose (approx.
2.20 m) for standard model
PD[FP
aFP
aFP
aFP
aFP
PD[FP
aFP
aFP

Bosch PVS F Series Specifications

General

Brand	Bosch
Model	PVS F Series
Category	Hob
Language	English