en FlexInduction
10
7 FlexInduction
The flexible cooking zone allows you to position cook-
ware of any shape or size any way you like. It consists
of four inductors that work independently of each other.
When the flexible cooking zone is in use, only the area
that is covered by cookware is activated.
7.1 Positioning the cookware
The flexible cooking zone can be configured in two
ways, depending on which cookware is used. In order
to guarantee good thermal detection and heat distribu-
tion, we recommend positioning the cookware in the
centre, as shown in the figures.
As a connected cooking zone
Recommended for cooking with just one item of cook-
ware.
¡ Position the cookware depending on the size:
¡ Recommended oblong cookware :
As two separate cooking zones
Recommended for cooking with two items of cook-
ware.
You can use the front and rear zone independently of
one another, and set a separate power level for each
zone.
7.2 FlexInduction connect
By default, the flexible zone is configured as two separ-
ate cooking zones. Switch on the following function to
connect the cooking zones:
1.
Select one of the two cooking zones.
2.
Press .
a The display lights up. The zone is connected.
Note:If you move or lift the cookware from an active
connected cooking zone, an automatic search starts.
Each item of cookware that is found within the cooking
zone during this search is heated at the previously se-
lected power level.
7.3 FlexInduction disconnecting
▶
Touch .
a The cooking zones are separated and work inde-
pendently of each other.
8 Time-setting options
Your hob has various functions for setting the cooking
time:
¡ Switch-off timer
¡ Timer
8.1 Switch-off timer
Allows you to program a cooking time for one or more
cooking zones. Once the time has elapsed, the cook-
ing zone is automatically switched off.
Switching on Switch-off timer
1.
Select the cooking zone and the power level.
2.
Press .
a in the cooking zone lights up.
3.
Set the time on the control panel.
‒ To set a cooking time of less than 10 minutes,
always touch 0 before you select the required
value.
a The cooking time begins to count down.
a A signal tone sounds once the time has elapsed.
4.
Press .
a The displays go out and the signal tone stops.
Note:When you set a cooking time for a cooking zone
in which the PerfectFry Sensor is activated, the cooking
time will not start counting down until the selected tem-
perature level has been reached.
Changing or switching off Switch-off timer
1.
Select the cooking zone and then touch .
2.
In the settings range, change the cooking time or
set to to delete the time.
To Next Page
Loading...
Need help?
General