EasyManua.ls Logo

Bosch Rexroth 4THE5 Series - User Manual

Bosch Rexroth 4THE5 Series
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Instruction manual
RE29696-01-B/2021-06-15, replaces: 2021-05-20, EN
Electronic joysticks
and control grips
4THE5, EC
Question and Answer IconNeed help?

Do you have a question about the Bosch Rexroth 4THE5 Series and is the answer not in the manual?

Summary

1 About this documentation

1.1 Validity of the documentation

Defines the product scope and intended audience for this documentation.

1.2 Required and supplementary documentation

Lists essential documents for product commissioning and use.

1.3 Representation of information

Explains how safety warnings, signal words, terms and symbols are presented.

2 Safety instructions

2.1 About this chapter

Introduces the importance of safety instructions for preventing injury and property damage.

2.2 Intended use

Specifies the product's intended application and operating conditions for mobile working machines.

2.3 Improper use

Details uses considered improper and states Bosch Rexroth's non-liability for damages.

2.4 Personnel qualifications

Defines the necessary mechanical, electrical, and hydraulic knowledge for safe operation.

2.5 General safety instructions

Outlines general safety rules for product use, installation, and maintenance.

2.6 Product-specific safety instructions

Provides safety warnings for system pressure, electrical voltage, and cable routing.

2.7 Personal protective equipment

Emphasizes the user's responsibility for appropriate personal protective equipment.

3 General instructions on property damage and product damage

4 Scope of delivery

5 About this product

5.1 Product description

Describes the 4THE5 joystick's purpose, application, and available output variants.

5.2 Product identification

Explains how to identify the product using material numbers on labels.

6 Transport and storage

6.1 Storing the joystick

Specifies requirements for storage duration, humidity, and temperature.

7 Installation

7.1 Unpacking

Details precautions for unpacking the joystick, especially regarding electrostatic discharge.

7.2 Installation conditions

Outlines environmental and proximity conditions for safe joystick installation.

7.3 Installing the joystick

Provides steps for physically mounting and connecting the joystick, including preparation and wiring.

8 Commissioning

9 Operation

10 Maintenance and repair

10.1 Cleaning and care

Provides instructions for cleaning the joystick, emphasizing precautions against damage.

10.2 Inspection and maintenance

States that no special inspection or maintenance activities are necessary.

10.3 Repair

Explains available spare parts and that the joystick base is not repairable.

11 Removal and replacement

12 Disposal

13 Extension and conversion

14 Troubleshooting

14.1 Malfunction table

Provides a table listing possible malfunctions, causes, and remedies for the joystick.

15 Technical data

Summary

1 About this documentation

1.1 Validity of the documentation

Defines the product scope and intended audience for this documentation.

1.2 Required and supplementary documentation

Lists essential documents for product commissioning and use.

1.3 Representation of information

Explains how safety warnings, signal words, terms and symbols are presented.

2 Safety instructions

2.1 About this chapter

Introduces the importance of safety instructions for preventing injury and property damage.

2.2 Intended use

Specifies the product's intended application and operating conditions for mobile working machines.

2.3 Improper use

Details uses considered improper and states Bosch Rexroth's non-liability for damages.

2.4 Personnel qualifications

Defines the necessary mechanical, electrical, and hydraulic knowledge for safe operation.

2.5 General safety instructions

Outlines general safety rules for product use, installation, and maintenance.

2.6 Product-specific safety instructions

Provides safety warnings for system pressure, electrical voltage, and cable routing.

2.7 Personal protective equipment

Emphasizes the user's responsibility for appropriate personal protective equipment.

3 General instructions on property damage and product damage

4 Scope of delivery

5 About this product

5.1 Product description

Describes the 4THE5 joystick's purpose, application, and available output variants.

5.2 Product identification

Explains how to identify the product using material numbers on labels.

6 Transport and storage

6.1 Storing the joystick

Specifies requirements for storage duration, humidity, and temperature.

7 Installation

7.1 Unpacking

Details precautions for unpacking the joystick, especially regarding electrostatic discharge.

7.2 Installation conditions

Outlines environmental and proximity conditions for safe joystick installation.

7.3 Installing the joystick

Provides steps for physically mounting and connecting the joystick, including preparation and wiring.

8 Commissioning

9 Operation

10 Maintenance and repair

10.1 Cleaning and care

Provides instructions for cleaning the joystick, emphasizing precautions against damage.

10.2 Inspection and maintenance

States that no special inspection or maintenance activities are necessary.

10.3 Repair

Explains available spare parts and that the joystick base is not repairable.

11 Removal and replacement

12 Disposal

13 Extension and conversion

14 Troubleshooting

14.1 Malfunction table

Provides a table listing possible malfunctions, causes, and remedies for the joystick.

15 Technical data

Bosch Rexroth 4THE5 Series Specifications

General IconGeneral
BrandBosch
ModelRexroth 4THE5 Series
CategoryVideo Game Controller
LanguageEnglish

Related product manuals