4 Anhang
4.1 EC declaration of conformity
According to ATEX directive 2014/34/EU, the manufacturer
Bosch Rexroth AG
Buergermeister-Dr.-Nebel-Straße 2
97816 Lohr am Main, Germany
hereby declares that the products below
3-PHASE SYNCHRONOUS PM-MOTOR
MSK030...-NSNN
MSK060...-NSNN
MSK071...-NSNN
MSK101...-NSNN
MSK040...-NSNN
MSK061...-NSNN
MSK076...-NSNN
MSK050...-NSNN
MSK070...-NSNN
MSK100...-NSNN
from the date of manufacture 2016-04-20 were developed, designed and
manufactured in compliance with the above-mentioned EU directive.
Harmonized standards applied:
Standard Title Edition
EN 60079-0
(IEC 60079-0)
Explosive atmospheres - Part 0:
Equipment – General requirements
2012 + A11:2013 (2011, modified
+ Cor.:2012 + Cor.: 2013)
EN 60079-15
(IEC 60079-15)
Explosive atmospheres - Part 15:
Equipment protection by type of pro‐
tection “n”
2010 (2010)
EN 60079-31
(IEC 60079-31)
Explosive atmospheres - Part 31:
Equipment dust ignition protection by
enclosure “t”
2014 (2013)
The motors have the following markings:
II 3G Ex nA T155°C Gc X
II 3D Ex tc IIIC T155°C Dc IP6X X
Further explanations:
The product is intended solely for installation in an machine. For the product
to be used as intended the user must comply with the provisions of use and
conditions of application laid down in the instructions (DOK-MOTOR*-
MSK*EXGIIK3-ITRS-xx-x).
DOK-MOTOR*-MSK*EXGIIK3-IT04-EN-P Bosch Rexroth AG 31/37
MSK Motors Operation in Potentially Explosive Areas ATEX Directive 2014/34/EU
Anhang
To Next Page
Loading...
