To Next PageTo Next Page
Need help?Do you have a question about the Bosch RH328VCQ and is the answer not in the manual?
General| Type | Rotary Hammer |
|---|---|
| Voltage | 120 V |
| Vibration Control | Yes |
| Chuck Type | SDS-plus |
| Cord Length | 8 ft |
| No Load RPM | 0-1, 300 RPM |
| Drilling Capacity in Concrete | 1-1/8 in |
| Drilling Capacity in Steel | 1/2 in |
| Drilling Capacity in Wood | 1-1/4 inch |
| Operating Modes | Drill, Hammer Drill |
Guidelines for maintaining a safe and clear workspace to prevent accidents.
Precautions regarding electrical connections and grounding to avoid shock.
Measures for operator protection, including alertness and PPE.
Procedure for inserting SDS-plus® accessories into the chuck.
Procedure for removing SDS-plus® accessories from the chuck.
Steps to remove the SDS-plus® quick change chuck.
Steps to attach the SDS-plus® quick change chuck.
Procedure for attaching the optional 3-jaw chuck.
Procedure for removing the SDS-plus® chuck.
How to insert accessories into the 3-jaw chuck.
How to remove accessories from the 3-jaw chuck.
Operating controls for speed, direction, and tool activation.
How to set the tool's operational mode and lock accessory positions.
Details on vibration damper, slip clutch, and general tips for effective use.
Information on carbide tipped bits and the 3-jaw chuck for versatile use.
Guidance on drilling wood, metal, and masonry safely and effectively.
Recommendations for professional servicing, brush and bearing checks.
Safe methods for cleaning the tool and recommended lubrication practices.
Table for choosing appropriate extension cords based on tool rating and length.
