To Next PageTo Next Page
Need help?Do you have a question about the Bosch RH1255VC and is the answer not in the manual?
General| Voltage | 120 V |
|---|---|
| Impact Energy | 4.5 J |
| Chuck Type | SDS-plus |
| Tool Holder | SDS-plus |
| Impact Rate | 0 - 4, 200 BPM |
| Drilling Capacity (Concrete) | 20 mm |
| Max. Concrete Drilling Diameter | 20 mm |
| Drilling Diameter in Concrete | 20 mm |
| Max. Core Bit Diameter | 40 mm |
| Drilling Capacity (Steel) | 13 mm |
| Drilling Diameter in Steel | 13 mm |
| Drilling Capacity (Wood) | 30 mm |
| Drilling Diameter in Wood | 30 mm |
| Amperage | 10 A |
Keep the work area clean and well-lit to prevent accidents and distractions during operation.
Ensure proper grounding, avoid wet conditions, and do not abuse power cords to prevent electric shock.
Stay alert, use PPE, and avoid distractions or fatigue for safe tool operation and injury prevention.
Use the correct tool for the job, ensure proper maintenance, and avoid forcing the tool for safe and efficient operation.
Operate the tool by squeezing the trigger; release to turn off. Features 'Lock-ON' in Hammering Only mode.
Adjust impact rate and speed using the dial for different applications, aided by Electronic Feedback Circuitry.
