Bosch PBH 220 RE User Manual

Robert Bosch GmbH
Power Tools Division
70745 Leinfelden-Echterdingen
www.bosch-pt.com
1 619 929 804 (2007.10) PS / 143
PBH 220 RE
PBH 240 RE
de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke
gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήσης
tr Orijinal işletme talimat
OBJ_DOKU-9147-002.fm Page 1 Tuesday, October 16, 2007 11:19 AM

Bosch PBH 220 RE Specifications

General

Power	550 W
Drilling Capacity in Concrete	22 mm
Drilling Capacity in Steel	13 mm
Drilling Capacity in Wood	30 mm
Chuck type / Tool Holder	SDS-plus
No-load Speed / Rated Speed	0-1100 rpm

Summary

General Power Tool Safety Warnings

Work Area Safety

Ensures a clean and well-lit work area to prevent accidents and distractions during operation.

Electrical Safety

Covers proper plug usage, avoiding grounded surfaces, and protecting against moisture and cord damage.

Personal Safety

Emphasizes staying alert, using protective equipment, preventing unintentional starts, and proper attire.

Power Tool Use and Care

Functional Description

Intended Use

The machine is intended for hammer drilling in concrete, brick, and stone, as well as light chiselling work.

Technical Data

Rotary Hammer Specifications

Lists technical specifications for PBH 220 RE and PBH 240 RE, including power, speed, and dimensions.

Noise/Vibration Information

Assembly

Auxiliary Handle Operation

Adjusting Drilling Depth

Selecting Drill Chucks and Tools

Replacing the Drill Chuck

Dust/Chip Extraction

Health Hazards and Precautions

Details health risks from dusts and recommends dust extraction and good ventilation.

Mounting the Dust Extraction Attachment

Adjusting Drilling Depth with Dust Extraction

Operation

Starting Operation

Ensure correct mains voltage and observe safety precautions before starting the machine.

Setting the Operating Mode

Reversing the Rotational Direction

Switching On and Off

Setting the Speed/Impact Rate

Preselecting the Speed/Impact Frequency

Safety Clutch

Explains the safety clutch function and precautions when the tool insert jams.

Settings for the Application Ranges

Working Advice

Changing the Chiselling Position (Vario-Lock)