Bosch PBH 240 RE User Manual

Robert Bosch GmbH
Power Tools Division
70745 Leinfelden-Echterdingen
www.bosch-pt.com
1 619 929 804 (2007.10) PS / 143
PBH 220 RE
PBH 240 RE
de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke
gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήσης
tr Orijinal işletme talimat
OBJ_DOKU-9147-002.fm Page 1 Tuesday, October 16, 2007 11:19 AM

Bosch PBH 240 RE Specifications

General

Impact energy	0.8 J
Max drilling diameter in steel	13 mm
Max drilling diameter in wood	30 mm
Tool Holder	SDS-plus
Power Consumption	240 W
Max. drilling diameter in concrete	10 mm
Drilling Diameter in Concrete	10 mm
Impact Rate	0 – 4800 bpm
No-load Speed	0 – 930 rpm

Summary

General Power Tool Safety Warnings

Work Area Safety

Ensures a safe working environment by keeping the area clean, well-lit, and free from hazards.

Electrical Safety

Highlights precautions for safe use of power tools concerning plugs, grounding, cords, and wet conditions.

Personal Safety

Covers user alertness, protective gear, proper attire, and avoiding unexpected movements during operation.

Power Tool Use and Care

Tool Operation and Maintenance

Guidelines on using the correct tool for the job, maintaining tools, and ensuring safe operation.

Service and Machine-Specific Safety

Service and Repair

Ensures power tool safety is maintained by using identical replacement parts during servicing.

Machine Operation Safety

Technical Data

Rotary Hammer Specifications

Details technical specifications for PBH 220 RE and PBH 240 RE models, including power and drilling capacity.

Noise/Vibration Information

Vibration Emission Levels

Details vibration emission values for hammer drilling and chiselling, and safety measures against exposure.

Assembly and Tool Changing

Auxiliary Handle and Depth Stop

SDS-plus and Keyless Chucks

Tool Insertion and Removal

Quick Change Chuck Operations

SDS-plus Tool Insertion

Non-SDS-plus Tool Insertion

Dust Extraction and Chip Management

Dust and Chip Extraction

Mounting Dust Extraction Attachment

Adjusting Drilling Depth with Extraction

Operation and Settings

Starting and Switching

Setting Operating Mode and Speed

Safety Clutch Function

Application Settings and Working Advice

Application Range Settings

Chiselling Position Adjustment

Maintenance and Cleaning