Bosch Rotak 32 R User Manual

English | 5
Bosch Power Tools F 016 L70 787 | (14.12.10)
Note: If an extension cable is used it must be earthed
and connected through the plug to the earth cable of
your supply network in accordance with prescribed
safety regulations.
If in doubt contact a qualified electrician or the
nearest Bosch Service Centre.
f WARNING! Inadequate extension cables can be
dangerous. Extension cable, plug and socket
must be of watertight construction and intended
for outdoor use.
Cable connections should be kept dry and off the
ground.
It is recommended for increased electrical safety to
use a Residual Current Device (RCD) with a tripping
current of not more than 30 mA. Always check your
RCD every time you use it.
For products not sold in GB:
WARNING: For your safety, it is required that the plug
attached to the machine is connected with the
extension cord. The coupling of the extension cord
must be protected against splash water, be made of
rubber or coated with rubber. The extension cord
must be used with a cable strain relief.
The connection lead must be inspected for signs of
damage at regular intervals and may only be used if in
perfect condition.
If the supply cord is damaged, it must be replaced by
a Bosch Service Centre.
Products sold in GB only: Your product is fitted with
an BS 1363/A approved electric plug with internal fuse
(ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it
should be cut off and an appropriate plug fitted in its
place by an authorised customer service agent. The
replacement plug should have the same fuse rating as
the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be inserted
into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a residual
current device (RCD) with a rated residual current of
30 mA or less.
Maintenance
f Always wear gardening gloves when handling or
working near the sharp blades.
f Keep all nuts, bolts and screws tight to be sure
that the machine is in safe working condition.
f Check the grass catcher frequently for wear or
deterioration.
f Examine the machine and replace worn or
damaged parts for safety.
f Ensure replacement cutting means of the right
type are used.
f Ensure replacement parts fitted are Bosch
approved.
Symbols
The following symbols are important for reading and
understanding the operating instructions. Please take
note of the symbols and their meaning. The correct
interpretation of the symbols will help you to use the
garden product in a better and safer manner.
Intended Use
The garden product is intended for domestic lawn
mowing.
Technical Data
Noise/Vibration Information
Measured sound values determined according to
2000/ 14/EC (1.60 m height, 1 m distance away).
Typically the A-weighted noise levels of the product
are: Sound pressure level 79 dB(A); sound power level
93 dB(A). Uncertainty K =1 dB.
Vibration total values (triax vector sum) determined
according to EN 60335:
Vibration emission value a
h
<2.5 m/s
2
,
Uncertainty K =1.5 m/s
2
.
Declaration of Conformity
We declare under our sole responsibility that the
product described under “Technical data” is in
conformity with the following standards or
standardization documents: EN 60335 according to
the provisions of the directives 2004/108/EC,
2006/42/EC, 2000/14/EC.
2000/14/EC: Guaranteed sound power level 94 dB(A).
Conformity assessment procedure according to
Annex VI.
Equipment category: 32
Notified body:
SRL, Sudbury, England, Nr. 1088
Technical file at:
Bosch Lawn and Garden Ltd., PT-LG/EAE,
Stowmarket, Suffolk IP14 1EY, England
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
10.12.2010
Mounting and Operation
Symbol Meaning
Movement direction
Reaction direction
Wear protective gloves
Weight
Switching On
Switching Off
Permitted action
Prohibited action
Accessories/Spare Parts
Lawnmower Rotak 32 R
Article number
3 600 H85 B..
Rated power input
W 1200
Blade width
cm 32
Height of cut
mm 20 – 60
Grassbox, capacity
l31
Weight according to
EPTA-Procedure 01/2003
kg 6.6
Protection class
/II
Serial number see type plate on the
garden product
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific
countries, these values can vary.
Please observe the article number on the type plate
of your garden product. The trade names of the indi-
vidual garden products may vary.
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
Action Figure
Delivery Scope 1
Assemble the Cable Winders 2
Handle Assembly 2
Snap together the Grassbox 3
Grassbox fitting/removing 3
Adjusting the Cutting Height 4
Winding off the Mains Cable 5
Starting 5
Stopping 5
Working Advice 5
– 6
Blade Maintenance 7
Selecting Accessories 7
OBJ_BUCH-1152-002.book Page 5 Tuesday, December 14, 2010 8:49 AM

Bosch Rotak 32 R Specifications

General

Power source	AC
AC input voltage	220 - 240 V
Manual	Yes
Batteries included	No
Pallet width	1200 mm
Pallet height	1230 mm
Pallet length	1000 mm
Pallet weight	173800 g
Country of origin	Hungary
Customs product code (TARIC)	84331110
Number of cartons per pallet	16 pc(s)
Number of cartons per pallet layer	4 pc(s)
Export Control Classification Number (ECCN)	-
Type	Walk behind lawn mower
Torque (max)	32 N⋅m
Cutting width	320 mm
Product color	Green
Uncertainty K	1.5 m/s²
Cutting system	Rotary blades
Number of wheels	4 wheel(s)
Maximum lawn area	300 m²
Maximum cutting height	60 mm
Minimum cutting height	20 mm
Grass collecting volume	31 L
Number of height positions	3
Number of shipping (inner) cases per master (outer) case	1 pc(s)

Weight and Dimensions

Depth	1170 mm
Width	360 mm
Height	910 mm
Weight	6800 g
Package depth	590 mm
Package width	395 mm
Package height	275 mm
Package weight	9300 g