Troubleshooting NL
s Troubleshootingfix disruptions
s You can remedy minor faults on the device yourself. Before contacting customer
service, please refer to the troubleshooting information. This way you avoid
unnecessary costs.
fix disruptions
WARNING
Risk of electric shock!
Improper repairs are dangerous.
▶ Only qualified personnel may carry out repairs on the device
to carry out.
▶ Only original spare parts may be used for repair
ration of the device.
▶ If the power cord of this appliance is damaged, it must be replaced
caught by a special cord available from the manufacturer or service
deputy service.
Error code / error indication / signal
Malfunction Cause Troubleshooting
Water supply
indicator lit
Water inlet hose is
kinked.
▶ Lay the water inlet hose
of kinks.
Tap is closed.
▶ Turn on the tap.
Tap is clogged or calcified. ▶ Turn on the tap. The sieves
in the water connection 1. Switch off the device.
inlet or AquaStop
hose are clogged.
2. Remove the plug from the socket.
3. Turn off the tap.
4. Unscrew the water connection.
5. Remove the strainer from the inlet hose
6. Clean the strainer.
7. Place the strainer in the supply hose.
8. Screw on the water connection.
9. Check the water connection for
leaks.
37
To Next Page
Loading...
